Has anyone tried replacing the 4 main instrument cluster bulbs with incandescent but without the green condom sleeve?
Wondering how this looks; I kind of like the white look of the led, but ideally looking for longevity here.
I already purchased new green condoms from McMaster-Carr, but...
About 7 years old; I have 325,000 on my 1997 and want to set it up to go another 100k while I slowly build a replacement engine.
I just replaced the front heater core box (full dash removal...fun!), heater control valve with fresh hoses back there and did rear heater delete.
Since I was in the...
I have the HPS silicone radiator hoses
Initilally I had a light seepage but then put OEM clamps on everything and not a peep since.
That was 105,000 miles ago
I am doing a new thermostat and bypass o-rings next weekend along with a radiator flush.
My blue silicone radiator hoses look good; any...
I ordered a #74 Sylvania bulb for my glovebox; it's actually taller than the OEM bulb and doesn't want to seat properly; seems just a tad bit wider on the wedge part of the bulb.
I'm just going to order an OEM; thanks to CDAN for the part number in post #4 from 10 years ago!
I also tried a #74...
I am having trouble replacing the two bushings (33511B, 90386-15003) at either end of the shift shaft (part 33511 in the diagram)
I can tap these bushing into the housing with a hammer and 17mm socket, but the shift bar tears-up the bushing when I try to hammer that inside. Broken 4 new...
All started when I decided to have the shift lever re-covered
Once I got in there I noticed there was a tear in the rubber boot under the base plate so I decided to replace it
Another thread suggested that "while I'm in there", replace those two bushings along with two rubber grommets on the...
I'm bumping this because I'm having the same exact problem
I've broken 4 bushings already and this is getting frustrating
I can tap the bushings into the housing with a 17mm socket and a hammer; very snug, but they go in
When I go to insert the rod, it will start (with assistance from a hammer)...