Search results for query: *

Forum search Google search

  1. H2o

    93 Master Cylinder work on 74 fj40?

    It seems the resididual valves are behind a brass cone installed in the exit fitting, where you screw in your brake line. They say to pull it out with a screw extractor, remove it, and reinstall the cone.
  2. H2o

    Replacing 1974 Booster

    City Racer sells the spacers. The SKP booster comes with a spacer. Isn't China the new Japan?
  3. H2o

    Replacing 1974 Booster

    I have a MC from a 1993 pickup that I want to use. It looks similar, and may be the same as your MC (80 series ?) you used.
  4. H2o

    Replacing 1974 Booster

    Do you have the PN for that connector?
  5. H2o

    Replacing 1974 Booster

    Did you connect your MC to the truck brake lights? if so, where did you get the connector?
  6. H2o

    Replacing 1974 Booster

    @Green Bean, What MC did you install? Removing the spacer would give me extra room in the engine compartment, but the length of the rod would be too long. I would have to see if it would give me enough adjustment on the pedal side. I have not yet had time test fit it all.
  7. H2o

    93 Master Cylinder work on 74 fj40?

    Does anyone know where residual valves are located? @archie73, if your brakes are singing, I would imagine your 10lb residual drum valve is still installed? Wouldn't you need to remove it? I was originally running my 74 MC with the front residual valve removed completely, it stopped great.
  8. H2o

    Replacing 1974 Booster

    Last image
  9. H2o

    Replacing 1974 Booster

    My 1974 OEM booster failed a few years ago and have not had time to deal with it. I started rebuilding the 74 booster that had brake fluid leak into it. I tore it down, repainted, and reassembled it, but was unable to get some of the external gaskets to finish the job. Finally getting back to...
  10. H2o

    93 Master Cylinder work on 74 fj40?

    I have a 74 FJ40. I have disks in front, and drums in rear. I just ordered a new booster to replace the OEM that I rebuilt, but was missing one seal that I could not find, so decided to upgrade to the later dual diaphragm booster. I have a 93 toyota pickup Master cylinder and was wondering if...
  11. H2o

    Booster for 74 fj40

    I rebuilt the 74 booster myself (or really should say tore it down, cleaned it and reassembled it), but i need one part and could not find it (rear seal). so I shelved that booster. And since it is inferior to the later boosters, i thought i would upgrade. I will try to get some pictures later...
  12. H2o

    Brake Booster Options

    How did this end? did the booster work?
  13. H2o

    Booster for 74 fj40

    I found a booster from a 1993 mini truck and thought it would bolt up to my 1974 fj40. It is hitting the parking brake cable and housing? Do I need to do any modifications to install this booster? Thanks.
  14. H2o

    71 Brake Booster Seals

    any luck?? i need the same seal...
  15. H2o

    Replacement booster seal for 1974 fj40

    Anyone?
  16. H2o

    Replacement booster seal for 1974 fj40

    bump
  17. H2o

    Replacement booster seal for 1974 fj40

    I recently rebuilt my booster of my 1974 FJ40. I am missing the rear seal where the push rod goes through. Would anyone happen to have the PN of an alternative gasket since original is no longer available? pretty sure this is a part that can fit many other vehicles. The push rod is 12mm, so ID...
  18. H2o

    Brake booster questions

    So I have a 74 LC with front disks. Have all the parts to do rear disks (from poser). I just bought a 74 MC since i was hoping to keep as original as possible. But then found out that my booster was full of brake fluid and has been sitting like that for about a year. I took it apart to clean it...
  19. H2o

    Brackets for Rear disk conversion

    Looking to finally do the conversion to disk on rear of my 74 40. My MC is dead so looking to replace with 80 series Non ABS MC. I believe no proportioning valve is required. I had gotten the steel many years ago and was planning on fabricating brackets myself. After reading around, found...
  20. H2o

    Options for 74 fj40 brake master cyclinder?

    My rear brake master cylinder reservoir is empty and leaking down firewall. Is there a good aftermarket MC available. Or is there a good place to have the rebuild with stainless sleeves? Any good upgrades to do at this stage? I have disks/knuckles from 4runner on front and still have drum...
Back
Top Bottom