Search results for query: *

Forum search Google search

  1. gregkline55

    Builds Hell and High Water - A Build

    Finished removing the rest of the factory sound deadening, still have to remove the rest of the aftermarket stuff which isnt fun to remove. The newer stuff was put in poorly and definitely was holding moisture in some areas in all I only found two areas that I didnt know about that need fixing...
  2. gregkline55

    Builds BurntToast's FJ62 Build

    I believe the mosely PS line is meant to work with the pump with the reservoir attached not the style you have. Im sure someone can get the proper fitting on there though
  3. gregkline55

    PTO winch compatibility question

    Where are you at? I saw this locally on FB marketplace, always fun finding other local 60 people
  4. gregkline55

    Builds Hell and High Water - A Build

    Lots of progress this weekend, biggest thing was getting the main chassis harness back in. Finished adding in provisions for cruise control and other accessories, wrapped it all up, and got it pulled back into the truck. I then could (almost) finish terminating everything to link back into the...
  5. gregkline55

    Builds Hell and High Water - A Build

    Did a test fit of the relay panel today, super happy, fits exactly as it should. So getting closer to having the wiring all finished up, engine harness just needs a few more wires terminated and the bundle going to the TAC module needs to be shortened. From there its just wrapping it in loom and...
  6. gregkline55

    Builds Hell and High Water - A Build

    So designed up a mount for the electronics in solidworks and sent it off to SendCutSend, it mounts on the side of the fender. This will house the RTMR, bus bars, and main ignition relay, there is also area for two additional relays if needed down the road on each side. I have a cap for it too...
  7. gregkline55

    Builds Ole Blue 60 gets a fresh start- EFI and more

    What are you doing for the repair panels? Are they building their own? Reproductions or cut sections from an old truck? Just curious as I have to tackle this as well
  8. gregkline55

    Builds Hell and High Water - A Build

    Wiring is finally going back in the truck! Engine harness is in and looking good, this past Friday I got all of the heat shield loom on the cam position sensor and O2 sensor runs, and then Saturday I got it in the truck to start to finalize it. Where I have the PCM and TAC module should work...
  9. gregkline55

    Builds Hell and High Water - A Build

    My father was working on one of our skidders in the shop and leaned a wheel up on the 60, I like the yellow on yellow steelies!
  10. gregkline55

    Builds Hell and High Water - A Build

    So have the engine wiring harness close to done, just need to finish up the connector for the relay panel here to the harness itself. Happy with the final outcome of the harness so far, should look nice and clean. I've made a mount for the relay panel in solidworks and will get it sent out to...
  11. gregkline55

    Builds Hell and High Water - A Build

    I really love wiring, its fun, although I cant say I did this completely from scratch. I started with a cheap generic LS stand alone harness and went through it and modified it to be a much better product, Using an Eaton Bussmann RTMR for the main relay/fuse panel and Littlefuse/GEP products for...
  12. gregkline55

    Builds Hell and High Water - A Build

    Finished up my wiper linkages with some paint and then greased them up and clipped them together using some 10mm circlips. Super happy with how they turned out. On Friday I was able to machine my PCM mount, super happy with the fitment, plenty of clearance to the fender tub. this is just...
  13. gregkline55

    Builds Hell and High Water - A Build

    Understood, for my peace of mind and the small amount of work it takes to do it, I'll probably still put it in. No harm in doing so. On another note, found a radiator shroud sized perfectly for the cruiser, with fans, lightly used on FB marketplace. Buddy of mine grabbed it for me and is...
  14. gregkline55

    Mickey Thompson Classics - What the Heck!?

    Its close while stationary, its most like just from deflection in the tire when theres load on it. you could just do a small spacer and most likely solve your issues.
  15. gregkline55

    Builds Hell and High Water - A Build

    So I think I've given up on trying to hide the PCM in the fender, just doesn't feel like the juice is worth the squeeze, so I've resided to placing on the passenger side firewall. Started placing it last night and taking measurements, will make a mount out of some aluminum that will utilize...
  16. gregkline55

    What did you do with your 60 this weekend?

    I continued to get this truck another step closer to being road worthy again, drivetrain is coming along in the shop while in my office I'm building my engine harness and cleaning up my chassis harness. Onwards and upwards...
  17. gregkline55

    Builds Hell and High Water - A Build

    Got some good work done this Saturday, continuing to work on the wiring back at my house, ordered up all of what I need to get the engine fired up in the hear future, and then worked on my wiper linkages. Wiper linkages turned out really nice, welded up nicely, going to sand blast...
  18. gregkline55

    Builds Hell and High Water - A Build

    Thank you! My father and I love our old german metal, have built/restored many over the years. My father had an '02 as his first car back in 1980 and than many E30s after that, and now I have had many myself too.
  19. gregkline55

    Builds Hell and High Water - A Build

    Working on the truck this weekend, getting the front end put back together now that I got my hardware back. Also got my new oil pan and pickup installed, gained a ton of room there. Then also started fitting up the engine harness, I think I will be putting the PCM in the inside of the fender...
  20. gregkline55

    Builds Hell and High Water - A Build

    Working on my wiper linkages today on lunch, ended up ordering some 5/16" tie rods meant for a small go kart, this gave me pretty much everything I needed to do this. Only item not included with this is the shoulder bolts but I have those on the way. Started by turning down the tie enough to...
Back
Top Bottom