First off just for fun here was my recent project starting with before pics:
I then had an oops and rammed a stick into the fiberglass header panel and was to chicken to fix it because it delammed a small section on a park light tab and i didn't want the park light to sit crooked or high or...
:lol:
I wasnt going to say it but since someone else did i agree! I tried to roll it and :bang: but others have done it successfully and it looks great!!!!!!!!!!!!!!! Guns to shoot it on are only like 25.00 but maybe that is why it took me a gallon to do under my tub?????? If i rolled it...
HMM... I/you would sure think so but ?? I need to shut up because i sprayed mine and may have lost a bit across the entire shop!! :) I have no idea how far a roller can make it. But for the most part i controlled well and.... Never mind if three gallons wont do a great job then what the...
Glad to help hope all goes well! I have used durabak and wish i would have had a little more than a gallon to do the underside of the tub..... You do have 3 though that should be fine. I know you will want to put it on in a couple coats because if you only do one you will ummm.... see...
One option - I havent seen the trim if it is metal then i guess just tape it off but if it is rubber then you could get some small rope and shove it under the gasket all the way around which in turn will lift it up a little allowing you to get tape under and over the trim and some durabak under...
If you do apply rust bullet (which i think is good) do your self a huge favor and dont do like me!! LET THE RUST BULLET AT MINIMUM ALMOST DRY! Or what might work best is just let it dry completely and then sand it lightly and wipe with degreaser real quick and bingo forever it will last! I...
Yes that is exactly how it was! Imagine i had about 10 coils of hose inside the bucket and the trap exactly there except the same height as the bucket. Not sure if that would matter.
No need to hate to tell me mine is done :flipoff2: :D
I know i tried a small blaster also. The fine sand clogged bad and the course stuff worked ok..... A compressor has to run like crazy and even if it is big and keeps up ok they will draw a lot of moisture and that may not be helping. I...
Yes because think of the RB as having a chemical in it that converts the rust to lets say.... not rust. But if you put the sealer over the rust first then the rust is not converted and the RB cant get through the sealer to kick the rusts butt. :hhmm:
Yes and no having it re-blasted will...
Something you may run into is trying to hurry to avoid flash rust and what i forsee is what i did. Make sure you dont apply the RB and then try to seal over it to soon or it will off gas releasing your sealer and creating bubbles. (Dont ask me how i know) Yet quote me if i am wrong here guys...
I just had a frame blasted cost 150.00 and i then had my tub, trans cover, and radiator support blasted cost 300.00 they did well however just a heads up if you dont have a gun expect 150.00 for an ok one and 150.00 for a gallon of sealer with two part, and a few bucks for degreaser, and if you...
That looks nice good work!
I have two gallons sitting here one in black for under the tub and Dark Grey with UV for the inside of the tub. I WANT TO SPRAY it but everything i read says good luck... Has anyone had any experience with spraying it??
I have had a few welders both gas and non and i would never go back to flux core wire. Gas in my opinion is the only way to go. A few years ago i purchased a millermatic 175. It was the breaking line between small and big and spendy and not. I think i paid around 800 or so with gas bottle...