Search results for query: *

Forum search Google search

  1. retro6740

    Front Output Shaft Castle Nut

    My puller worked to get it off and it wasn't too bad. I'll use Permatex on the splines when re-assembling. What sucked was the PO just squirted black RTV all around the castle nut, basically just filling up the entire gap. So I had to dig out the castle nut and then apply a bunch of pressure to...
  2. retro6740

    Front Output Shaft Castle Nut

    Turned out to be a TON of black RTV holding the castle nut (and everything) in place. The PO must have just coated the insides when they were replacing the seal. Notes for others who might run into this in the future: 1) It is not a left-threaded nut so standard lefty-loosey will loosen it. 2)...
  3. retro6740

    Front Output Shaft Castle Nut

    For clarity, it's the front output shaft of the transfer case.
  4. retro6740

    Front Output Shaft Castle Nut

    Hey all, Trying to replace the front output seal on my 67 FJ40 and cannot seem to get this output shaft castle nut to budge. I built a steel jig to hold the flange from moving and then tried using a long breaker bar on the nut to break it loose (counter-clockwise/lefty-loosey). It had a cotter...
Back
Top Bottom