Search results for query: *

Forum search Google search

  1. kangjinsoo

    Overheating uphill normal 3fe motor?

    I got my oem style radiator from cruiser corp it was about $590 w shipping
  2. kangjinsoo

    Overheating uphill normal 3fe motor?

    I found an OEM from cruiser corps… anyone have any experience with them?
  3. kangjinsoo

    Overheating uphill normal 3fe motor?

    Any recommendation on where to buy a Liland radiator? I checked a couple of my go to sites and they seem to be out of stock…?
  4. kangjinsoo

    Overheating uphill normal 3fe motor?

    Not fixed after all. just took the FJ80 on the freeway… temp got up to 200 just cruising normal highway speeds. Temp outside was nice and cool. Question: should I replace the water pump or radiator? or both? thoughts….
  5. kangjinsoo

    Overheating uphill normal 3fe motor?

    took Her on a test drive up the hill… never went above 185! Fixed! so releived. on to the next project.
  6. kangjinsoo

    Overheating uphill normal 3fe motor?

    Finally finished up the project. She runs again!!! Taking her out for a test drive to make sure she doesn’t over heat still. Thanks for all the help! PS these Toyota hoses are too insanely pricy!
  7. kangjinsoo

    Overheating uphill normal 3fe motor?

    update: installed new belts, fan clutch, lower radiator hose, thermostat, vacuum hoses, re wrapped wires for heat protection. Waiting on some thermostat housing bypass hoses to finish her up! the anticipation is killing me!!!
  8. kangjinsoo

    Overheating uphill normal 3fe motor?

    Pic
  9. kangjinsoo

    Overheating uphill normal 3fe motor?

    I am referring to the rubber o ring that goes inside the actual thermostat housing. It appears to rest upside down in just about e the thermostat itself. the paper gasket seems straight forward as it rests on the block. my concern is that the rubber O ring will fall down and become...
  10. kangjinsoo

    Overheating uphill normal 3fe motor?

    This may be a dumb question but when I put the thermostat housing back together how do I keep the rubber seal from falling down when installing? it seems that it will fall down while trying to adjust the housing to the block…
  11. kangjinsoo

    Overheating uphill normal 3fe motor?

    Does anyone know the diameter of the little vacuum hoses for the efi? Can’t seem to find any markings on the old ones.
  12. kangjinsoo

    Overheating uphill normal 3fe motor?

    ordered OEM…
  13. kangjinsoo

    Overheating uphill normal 3fe motor?

    Pics
  14. kangjinsoo

    Overheating uphill normal 3fe motor?

    Pics of tear down today…
  15. kangjinsoo

    Overheating uphill normal 3fe motor?

    Tore down the fan clutch, radiator hose, and belts today. Also took apart the thermostat housing to replace the thermostat. I need a couple parts now... Does anyone have a good part supplier/part numbers for the thermostat housing hose? Also looking for the studs and nuts that belong to the...
  16. kangjinsoo

    Overheating uphill normal 3fe motor?

    What brand radiator did you end up going with?
  17. kangjinsoo

    Overheating uphill normal 3fe motor?

    went on rock auto and the Gates thermostat was actually more expensive than the Aisin brand….?
  18. kangjinsoo

    Overheating uphill normal 3fe motor?

    As far as thermostat brands… Aisin thermostat also preferred? Or is Gates good also?
  19. kangjinsoo

    Overheating uphill normal 3fe motor?

    Disregard. Returned and ordered an Aisin fan clutch. Thanks!
  20. kangjinsoo

    Overheating uphill normal 3fe motor?

    I’ve already received a fan clutch however it is a “beck arnely” brand clutch. part number 130-0185. no good? the aforementioned fan clutch is 3x’s the price which is why I went for the more cost effective one.
Back
Top Bottom