Search results for query: *

Forum search Google search

  1. iCruiser

    Builds 1985 FJ60 Gets a Holley Sniper EFI Setup

    The pump did seem to operate louder at altitude but is acting normal now back on flat ground. It was loud as we were trying to restart the truck. Seems to be having venting issues only at altitude under extended loads. What could be causing pressure to build in the gas tank under these...
  2. iCruiser

    Builds 1985 FJ60 Gets a Holley Sniper EFI Setup

    This seems to be the official Sniper thread so wanted to share a hiccup to see if anyone had any ideas. Have been running the Sniper for about 2 years with very favorable results. This past week driving from KC to Ouray, we experienced crazy AFR values (mostly high red) with a poorly running...
  3. iCruiser

    Builds 1985 FJ60 Gets a Holley Sniper EFI Setup

    See post #825 in this thread. I posted pics of the SRK-4000 bracket. Highly recommend the extension lever from Lokar as well. Tight fit working the cable around the brake booster but doable. Curious if these other brackets make for a cleaner install with the cable.
  4. iCruiser

    Builds 1985 FJ60 Gets a Holley Sniper EFI Setup

    This will take you to the Amazon O2 sensor for the Sniper. Could not tell a difference from the one that comes from Holley. Works great.
  5. iCruiser

    Builds 1985 FJ60 Gets a Holley Sniper EFI Setup

    Yes, the red dotted line would represent the angle of attack on my setup. I did have binding without using the spring that came with the 4001 Hollley bracket. Once I installed the spring that came with the bracket, throttle worked great. My first setup had the bracket on the front of the...
  6. iCruiser

    Builds 1985 FJ60 Gets a Holley Sniper EFI Setup

    Here are pics as requested of the Holley Sniper bracket and lever extension. You will see I had to angle the bracket allowing the trotttle cable to clear the booster. I considered the Lokar bracket referenced above. Wonder if it would mount more square or allow easier clearance from the booster?
  7. iCruiser

    Builds 1985 FJ60 Gets a Holley Sniper EFI Setup

    I installed the Holley lever extension. Made a huge difference. I was fighting a quick throttle off the start with the Sniper especially since upgrading to 411s.. This extension makes the stroke more progressive. Had to use the Holley SRK-4000 bracket to run throttle cable to the back of the...
  8. iCruiser

    Builds 1985 FJ60 Gets a Holley Sniper EFI Setup

    Problem solved. Thank you.
  9. iCruiser

    Builds 1985 FJ60 Gets a Holley Sniper EFI Setup

    Great idea to drill a hole in the gas cap. Below is a pic of my canister / check value setup. The check value is held in place by the attached hoses but sits somewhat at an angle versus sitting horizontal. Do these check valves have to be perfectly level to work properly?
  10. iCruiser

    Builds 1985 FJ60 Gets a Holley Sniper EFI Setup

    I'm noticing a whooshing when removing gas cap to refill. Is this normal for a fuel injected system pressurizing the fuel tank? Installed a new GM canister installed to eliminate the whooshing back when 2F was fed by a carb. Now the whooshing is back after installing the Sniper?
  11. iCruiser

    Builds 1985 FJ60 Gets a Holley Sniper EFI Setup

    Any benefit to keeping the carb blower installed post Sniper install? Like how this Sniper setup cleans up the engine bay.
Back
Top Bottom