Runs like a top, such a sweet little truck, I ended up replacing the fuel tank because it had pinholes, so as far as the fuel system goes, It's all new from the tank to the pump/sock, all rubber hoses, filter, and blew all the lines clean!! also went through the valve adjustment but I have now...
I have no idea but I would assume yes. The info I got from the PO was that when he got it the original owner had stopped driving it. SO yeah, This thing prolly sat a while. Just got done filling my shopping cart at Toyota with all the rings, seals, and such. Also added a fuel filter and all the...
Ok so after all the basic diag it seemed inevitable that i would have to pull this upper intake and have a look at the fuel delivery system..so I got it torn down and amazingly did NOT break any connectors! I found it odd when I pulled the rail off that a couple of the injectors stayed in the...
Ok, So are you saying that the specific #2 and #4 injectors if stuck would not directly affect cyl. #2 and #4? because they inject into the manifold rather than directly to the Cylinder Combustion Camber?
Looks like I'll be pulling the upper Intake regardless even to test the pulse, if I have...
OK so I got the replacement pushrod and installed it. I didn't do a valve adjustment yet. I just got it in there and made sure it wasn't to tight or loose and put the air box and hoses back on and fired it up. it ran obviously better (Not good but better) with compression on all 6 and seemed to...
Bahaha!! I see that now, nobody is happy with them…well lucky it’s only $20…we’ll see if I ever get it. I also have it in my cart at Toyotapartsonline…or heck maybe I just call the local dealer and see what their turn around is. Either way thanks for the feedback and good call on the Penetrant...
Ordered the pushrod yesterday from Cruiserparts.net. Seemed to be the fastest way to get one. Toyota still lists it so it doesn’t seem like it will be an issue getting one. I also put it back in with the rocker rotated out of the way and spun it over to see if the cam was pushing the lifter up...
Here’s a few pics of my situation…lifter end of the pushrod is a bitt marred so I hope the lifter didn’t get buggered up. Engine is a bit gunky but I’ve seen worse….
Hey 3F-E engine experts, I have a new to me 91' 80 series with a 3F-E with 175k miles. I purchased it as a project with a poorly running engine. upon getting the LC home, cleaning it up and starting to diag. the motor I found Cyl. #6 to have no compression...borescope revealed nothing obvious...