Search results for query: *

Forum search Google search

  1. MisipLC

    97 Crank and No Start

    And once again, 15amp fuse brings all things back to life. Win to @jonheld. I called myself looking in EWD for this answer and came up short. Where can find info on gauge wire used in various places? Need to make jumper for VSV to speedo. This is not related to no start issue.
  2. MisipLC

    97 Crank and No Start

    Will do.
  3. MisipLC

    97 Crank and No Start

    Thank you. Will do. Crazy thing is rear heater fan works.
  4. MisipLC

    97 Crank and No Start

    Thanks jonheld. The craziest thing. I put the relay that was not working back into fuse block and truck cranked. I did work the pi 1 and 12 on e7 and finally got 12v on pin 1. Put all together and it started. Is the radio a/c fan and clock on same fuse? Do they run through ECU? I ask...
  5. MisipLC

    97 Crank and No Start

    Guess I did not catch full import of this post. I wiggled everything, and now have crank and run. but do not know what was causing original issues. But now we have no radio, ac fan r clock. Which is interesting because not only does the truck crank, but the truck also idles better than is...
  6. MisipLC

    97 Crank and No Start

    thanks jonheld. You guys are not going to believe this. Did some "shaking" of the main engine loom, and she cranked. But there is always a price for the mircacl. Now, the a/c fan and radio will not come on. We have lights in the environmental controls, but the fan does not work. the rear...
  7. MisipLC

    97 Crank and No Start

    Is there a way to test the EFI relay to determine if it is good?
  8. MisipLC

    97 Crank and No Start

    I did.
  9. MisipLC

    97 Crank and No Start

    I pulled the power relay found in driver kick panel and tried in EFI relay slot. Then check +B. This assumes that relay is good.
  10. MisipLC

    97 Crank and No Start

    Key on. 12V at +B 0V at E7 pins 1 and 12 CEL illuminated Crank no start
  11. MisipLC

    97 Crank and No Start

    Glad that you were able to find a simple fix to your problem. And thank you for the fusible link. Still working my problem.
  12. MisipLC

    97 Crank and No Start

    Yes, it never happened at a convenient time. Mine stopped, I replaceYes, it never happened at a convenient time. I replaced EF I relay and the truck cranked five or six times. Then it would not. Replaced fuel pump relay and truck cranked five or six times and then would not crank. And it appears...
  13. MisipLC

    97 Crank and No Start

    Gentlemen (term used loosely) thank you for the feedback. When I moved the relay from kick panel to the FBI position, I did have CEL. I also had 12 bolts at plus B. But Truck would not crank. I will replace 7.5 amp fuse and check for 12 bolts at E7-1. Is there a condition that would cause the...
  14. MisipLC

    97 Crank and No Start

    Here is where I am as of today. It began with truck cranking, with no start. Installed a new starter because the starter occasionally would not turn over. Truck cranked and driven home. 5-6 times after new starter, the truck started. On the 6th or 7th try, the truck would crank, but not start...
  15. MisipLC

    97 Crank and No Start

    Have not. Got 12V at +B when i change out rEFI elay
  16. MisipLC

    97 Crank and No Start

    Back from additional testing. Removed the EFI relay from box on fender. Took relay from side kick panel that powers the sunroof. Placing this relay into the socket for the EFI relay resulted in +12V at the +B Diagnostics pin. It also resulted in an illuminated CEL. But the truck would not...
  17. MisipLC

    97 Crank and No Start

    New fusible link installed. Turned key and still no CEL. Thanks Jeeper. I’m at my wits end. Regrouping to see what to do next. I’m going to look at Jeeper list. I’m not sure which slots to test for power. I tried to read electric manual. Seems not that smart. Don’t want to send to...
  18. MisipLC

    97 Crank and No Start

    You are kidding me!? Can get one from you?
  19. MisipLC

    97 Crank and No Start

    Thanks, and let me know what you find out. I have ordered a fusible link and waiting on it to arrive. I called my self, working my way back from the ECM to the connection under the PS reservoir. Not getting voltage on the battery side of the connection. So, i am assuming that fusible link is...
  20. MisipLC

    97 Crank and No Start

    Thank you Jeeper.
Back
Top Bottom