Search results for query: *

Forum search Google search

  1. rikard

    Installation Instructions LJ73

    Hi, Nice ride. If you look at this page, I have made a 3d model of the frame for the soft top: https://forum.ih8mud.com/threads/looking-for-a-soft-top-for-bj74.92215/page-4#post-1153236 I also made a PDF drawing of the tube parts and it can be downloaded here...
  2. rikard

    BJ73 Door tops Removed

    Take a look at this page: http://new.auto-kat.com/index.php?route=saleepc/toyota/parts&region=EUR&modification=4939&group=6761#68646 The covers ar number are from 68645 to 68648 in the figure.
  3. rikard

    hard top for ragtop 70 series

    Nice project! The switch disable all front wiper functions. Diddn't know all the differences between ragtop and FRP. Do you know witch year they produced ragtop 73/74?
  4. rikard

    The 73 roll cage suprised me

    Thanks for all the care!! I removed the roll bar tonight and all the 6mm bolts was ok. A cuple was bent but ok. The great impact hit the right side (roof, door, rear and front fender), even since we drowe off the road on left side. So it must have been upside down :whoops: One of the rear...
  5. rikard

    The 73 roll cage suprised me

    Yes, we are lucky. The accident was only 6 km from home.
  6. rikard

    The 73 roll cage suprised me

    More photos
  7. rikard

    The 73 roll cage suprised me

    My good companion through nearly 6 years (LJ73)is almost dead (at least in artificial coma for a while). We were two people driving my 73 on Saturday night. The temperature was about 6degC and it had been dry weather in a week. Inside the woods the pavement was good but there was a place that...
  8. rikard

    Toyota BJ 73 replacement WM with 3B

    Hi Dag, Here is a link to a Norwegian LC site (in norwegian) with VM - 14B (Dyna) swap: Norsk Land Cruiser Klubb :: Vis Temaet - Kjetila's BJ73 14B
  9. rikard

    my Lj 73 cabrio

    Nice ride, you have the same soft top as me. To fold it down, you have to fold upp the sides first. Then you can fold the roof several times back. 8Lje4
  10. rikard

    Prado-PZJ77 conversion

    Sounds very interesting! You also need to do a electric job, from 12V to 24V. Maybe its easier to rebuild the engine with 12V equipments.
  11. rikard

    windshield frame

    I think its important to have enough ventilation inside the holow frame from the inside. The original paint inside are not good and the difference between cold air and heat from the inside make condese inside the windshield. I have made some smal holes on the underside to let the water out. I...
  12. rikard

    frp top

    the side window on the FRP top are fastended with glue. First remove the gasket, and then you ned to use a knife to cut the glue around the frame.
  13. rikard

    LJ 73 windshield frame

    The only difference I have seen on the LX and VX windshield is the holes and threads for the handle on he A bar
  14. rikard

    Looking for Tough Pictures of MWB 70 Series

    The light duty LC have coil springs like the 4runner. It have 2" OME and 2" body lift. With the wide fender and some cut out it runs certified with 38". Im not shure what tyres it is. He changed to 60 front brakes and HiAce rear brakes.
  15. rikard

    BJ74 soft top

    You are welcome to Norway anytime! Its a lot of nice places go off road, but the laws are wery conservative about driving in the woods and on snow. There are few regulated areas left for that kind of fun but we still have some. I live on a farm and have some places to go around here. We have a...
  16. rikard

    Looking for Tough Pictures of MWB 70 Series

    Some photos of my friends old LJ73
  17. rikard

    BJ74 soft top

    The Cabrio works fine in all weather but I use my FRP in the winter. You can roll up the sides, the back and only the "front roof". Here is a model of the frame work of the soft top: Folded down
  18. rikard

    I hope this is normal

    Got some after picks and a drawing of the channels on this link: http://nlck.no/forum/download.php?id=4435 (Save target As...) I can't say that all the dimmentions are 100% accurate, but you can use it as a help for building new. Text is in Norwegian and Dimmentions in mm.
  19. rikard

    frp top

    In europe the early light duty and some HD cruisers come with FRP and 2 piece doors. Every *J73 imported by Toyota from -87 to -90 in Norway is like mine and none with OEM soft top. And mine is a cold spec cruiser with double heaters and defrost.
  20. rikard

    frp top

    If you got half doors, it's quite obvius how to remove the top. You got some black plastic cover with bolts inside. First remove the rubber band overlap, then the wires for the window heating, then the bolts attach to the frames. Then place the cowers for the frame holes
Back
Top Bottom