Search results for query: *

  • Users: clembs
  • Content: Threads
  • Order by date

Forum search Google search

  1. C

    What Bilstien 4600s to use with 3: lift 1970 FJ40?

    Hello everybody I have read many postings and threads on using the 5100 (5125) on lifted Fj40s bc they are for lifted trucks. I have also heard that the Bilstien 4600 provides a little smoother ride and I like the look better. I know I just need to measure the compressed and fully flexed "eye...
  2. C

    2000 LX470 Fuse block at Pos terminal I want to ad a fuse

    Hello all, I am trying to add a 30amp fuse to the fuse block located on the positive battery terminal. I have a US spec so my 100amp fuse location is empty and I'm adding a 10 ga. wire to am amplified sub for the stereo. I want to know if anyone sells the tab needed for the fuse to make...
  3. C

    For Sale  4 Yoko Geolander A/T G015 275/70/16 Almost brand new

    I have a set of 4 Yokohama Geolander G105 A/Ts for sale Under 1000 miles on the set. PO installed befor selling the truck to me and I want 285 BFG's I am asking $450 for the set plus shipping. (local pick up desired) Located in Roanoke VA. No flaws or faults in the tires. They are 2 months...
  4. C

    FJ40 Does anyone make a Drag link for Chevy 7/8-18 RHT to Stock FJ40 17mm TRE

    I am needing a new draglink for my sag/ jeep (chevy) drop pitman arm then 17mm Stock early FJ40 TRE on the knuckle side. I thought I had found a unicorn from Cruiser Outfitters bc they have an SAE RHT TRE to FJ40 17mm x1.5 on the other. The problem is that their "SAE" is for a 11/16"-18...
  5. C

    Will a fj60 Drag link TRE (21mm x 1.5) fit an FJ40 taper for Pass TRE

    Hello can anyone tell me if a "drag link/ relay rod" 21mm TRE from an FJ60 will fit the taper in the stock FJ40 passenger side TRE hole? Of will a stock 21mm FJ40 TRE taper do the same? I want to beefin up my drag link and get rid of the 17mm TREs for the Drag link. I understand the drag link...
  6. C

    1970 Tie-rod/ Drag link questions Saginaw

    Hello Everyone, I have some important TRE questions and have no idea who to call (AA, SOR, JT, Ruffstuff) I have a '70 fj40 (stock axels) with Saginaw ps and i have the '78-'79 Ford bronco drop pitman arm. The only TRE i have found to fit the pitman arm is a '78 bronco with reversed (left?)...
  7. C

    fj40 drop pitman arm tie-rod question

    Hey I have the 3 in drop pitman arm from Rough Country i think for my saginaw set up. Does anyone know if that pitman arm is a F250 or (i think) '79 Bronco tie rod? I am looking to beefin up my steering rods and I have bought the "tapered shim" but it didn't fit and I have a little slop in...
  8. C

    Wanted  Virginia, '91 or newer LHD 76? Series

    Hey I have been looking everywhere for a 5 door Left hand drive 70 series. Pref White but doesn't really matter. I know they exist in the USA just hard to find. Good running cond, low to minimal rust
  9. C

    4.7 Tundra Drivetrain in Jeep Grand Wagoneer

    Hey everybody, I just finished my '70 FJ40 resto and have the green light to start my next project. I picked up a complete '87 Grand Wagoneer (FSJ) for $600 and plan to make it a nice DD. My issue is the truck has 109k on it and the 360ci is a heavy engine and only produced 140hp stock so they...
  10. C

    Tundra V8 and auto in a Jeep Grand wagoneer

    Hey everybody, I just finished my '70 FJ40 resto and have the green light to start my next project. I picked up a complete '87 Grand Wagoneer (FSJ) for $600 and plan to make it a nice DD. My issue is the truck has 109k on it and the 360ci is a heavy engine and only produced 140hp stock so they...
  11. C

    1970 FJ40 Chevy front disk Brake line questions

    Hello I have searched and I have a front disk conversion on my '70 FJ40 and I am wanting to run the hard line down the front axel. My question is does anyone sell or know the specs on the short Flex line (SS or Rubber) going from the hard line to the banjo fitting K1500 '89 calipers? I just...
  12. C

    SW Va need '70 FJ40 Wire harness installed!!!!

    Hello mud, I have an almost completed 1970 FJ40 frame off restomod that I am dying to have a new harness installed. I have all new EZ harness with fuse box H4 headlights Single Wire new Alternater Chevy 350sb with Carb TH350 auto Trans No Radio New marker lights and most components Wire sleves...
  13. C

    sbc to FJ40 '73 tank question

    Hey everyone I have a '70 fj40 with a SBC 350 conversion and I recently (due to the filler neck style) found out i may have a '73ish fuel tank. I am installing the tank in the next week or so and am wondering if I need a return line, breather for the tank, or evaporator unit like the later...
  14. C

    Transmission Hump Hardware for '70 fj40

    Anybody know the sizes of the bolts for a trans hump hardware
  15. C

    Body mount question Tub to fender alignment

    Hey I have installed the energy suspension body mount kit on my 1970 fj40. Everything went on well but now I have a 1/2" gap at the sill for the hood (tub to fenders). The kit did not come with shims and I am looking into what shims to buy. All old shims were too rusted to re-use and that was...
  16. C

    GM 4 wheel disc/ FJ60 Line and fitting specs

    Hello everyone sorry for posting but could not find the info through search box. Installing the GM monte front/ rear disc conversion and FJ60 or 80 master. Can someone please give me the Fitting specs (10mmx 1?, bubble flair or not, etc.) and the hard line dia. for installing everything on an...
  17. C

    Wanted  Fj80 Booster and master for FJ40 conversion

    Hey doing a 4 wheel Disc conversion and I need a booster (GM, TOY that will work) please let me know if you have these bc I do not want to pay parts store price.
  18. C

    '70 FJ40 warn hub seal kit

    Hey I am looking to find a seal kit for course (6) spline warn hubs? they work well and I am not to the point that I care to rebuild outer birfs and 30 spline. Please contact if you know who sells Early warn locking hub seal kits. Thanks
  19. C

    What Speedo Gear do I need for '70 FJ40 with 33's for road and 35's trail

    Hey I am rebuilding the old 3spd T-case and need to know if there is a Speedo Gear change needed for running 33's for the road? I have stock 4.11s and stock high low gears. I can leave it stock if needed but figured this is the time to replace speedo cable (hopefully lengthened) and gear...
  20. C

    1970 Fj40 front axle hub nut size?

    Hey I have 2 questions for everybody (yep I already searched): 1st what is the axel hub nut size for a 1970 FJ40. I have heard 50mm (which I assume is correct), 52mm and 54mm which is for '76 and newer but it seems to be the most wide spread. 2nd: where online is the best place to buy the...
Back
Top Bottom