Steering wheel and center cap from a 9/72. Good shape. There is the start of a crack on the exterior of the center hub, but does not go all the way through. Horn buttons are there, but will need rebuilt(need the springs and metal bits that sit inside of the steering wheel. Not a hard job, but I...
Hello,
Any have the screw size (pitch and length) for the center cover over the steering wheel for a 9/72-80? I finally got a functional center cover, but realized that I don't have the screws...
Have a set used, but excellent condition head rests. No rips or tears. There is an indentation on the side of one of them(1/4" deep x 2" long). I think it was just the way it was sitting in the basket for the last 6 months, but in case it doesn't pop itself out, I'm just giving full disclosure...
Two sets of 4 point Crow Racing harness- works great, no issues, just a little wear, but no rips or holes in the webbing. Can be used at a 2 point if you do not want the tops on, which is how I usually used them. $45 each obo
Two sets of 2 point Crow lap belts, used in my rear seat (until I got...
Looking for M13 x 1.5 compression nuts that attach to the stock Aisan carb in a FJ40 and also the fuel pump. Looks like I would need three of them.
Thanks,
Nick
A little history. I converted my front drum brakes to disc about 6 years ago and has worked like a charm until Sat morning. Took the kids out for a spin to grab some breakfast and on the way home, the brakes started acting a little weird, not consistent, but every 4-5 traffic lights, it would...
Last things I need before I can swap over my Weber back to the original Aisan. I'm looking for the compression nuts that go on the metal fuel line can screw onto the male threaded unions at the carb. I need both the inlet and return nuts. If you have fuel lines in good shape with the nuts...
Here's a list of parts I need to complete my carburetor rebuild.
Need one main jet (135-147 sizes considered)
inlet screen
Compression Nuts for inlet and outlet
Fuel Float from a carb dated 78-87
Pump Connecting Link
2F air filter from years 75-80
Would also buy a whole carb that needs a...
So, after years of frustration with the fuel system in my 9/72 FJ40 beginning with the smelly poly tank, no charcoal canister, no fuel separator, poorly routed/capped fuel lines, and an ailing Weber carb; i'm finally going to tear it all out at once and start from scratch. Here's the plan:
1...
So, I packed up the kids and wife yesterday in the fj40 and set out for an hour long drive to a friends house, the truck was humming along fine around 60mph and then 15 miles into the trip, it just dies (kind of like it ran out of gas) and I had to pull over to the side of the road.
I could...
I've been searching for a fuel separator and charcoal canister for my FJ40, but haven't turned up much on the classifieds (without some reservations about buying a 40 year old plastic part). I have a 2F with a weber 38 carb, a poly tank, and zero emissions, evap equipment. all but two lines on...
Hello,
I've putting off installing 3 point seat belts in the front seats of my fj40 for many years now, but think I finally want to explore that option. I have a 4 point crow harness now but if I'm just cruising in town, I usually just have the lap belt on, but I do see a little highway here...
Looking for lower barndoor / tailgate hinges and center latch. Doesn't need to be the whole set, just need parts to rebuild mine.
Sent from my iPhone using IH8MUD
This is my first venture into the 120 forum, since I've always been a 40 guy, but a recent rear-ending by one of baltimore city's impeccable drivers forces me to look for a replacement to my daily beaten Jetta. Plus, I have two kids and possibly a third in the future, which makes the Jetta and...
Just like the title says, I'm getting ready to build or buy a CNC plasma table in the next 6 months. I've been reading on the topic over at weldingweb and cnczone for a few months now and I think I can at least ask some good questions. I've always respected and got some good advice on this...
Well, finally got around to installing the trollhole electronic dizzy I bought almost a year ago. But I ran into some questions while pulling it apart and decided to stop before pulling the old one out.
Step 1. I timed the engine with the current dizzy (unplugged vac hose on dizzy) and...
seems like a smoking deal for $149 at menards. reviews have been good for those needing a light metal saw.
http://www.menards.com/main/tools-hardware/power-tools/saws/10-multi-purpose-sliding-miter-saw/p-1803089-c-9082.htm
happy friday
So, I've grown tired of my HF abrasive chop saw and matching 4x6 bandsaw. i have a hard time getting accurate, straight, repeatable cuts. And forget about quick...Last welding project took twice as much time as it should have because of all the time I spent tinkering with bandsaw trying to get...
Hello,
I'm trying to find a replacement front seat bottom cushion/foam for a FJ40. I can use either a driver or passenger side one. I just need one, but might buy a pair if they are in really good shape. Might also be interested in the bottom seat pans too if they do not have any rust on...