Search results for query: *

Forum search Google search

  1. P

    SPC UCA advice needed

    Posted this in some lc200 fb groups also and it seems that yes there are supposed to be washers there that they didn't install
  2. P

    SPC UCA advice needed

    Good morning peeps, I had a local dealership install my Bilstein lift and SPC UCAs(1 year ago), the control arms(I'm assuming) are making a loud rubber creaking sound when going over speed bumps and is driving me crazy and can't figure it out. Can someone tell me if I'm supposed to have a...
  3. P

    Rear driver side squeak, need help

    Well I had taken it back to the dealership that did the install and it appeared to be fixed and was riding good for a couple weeks until my wife told me this morning that she's hearing a squeak again when going over bumps....will have to take another look when I get thome from work to see if...
  4. P

    Rear driver side squeak, need help

    Thanks, these were my thoughts also
  5. P

    Rear driver side squeak, need help

    What's up guys, developed a squeak on drivers rear a few months after Bilstein 6112/5260 install( or maybe just now noticing with windows down) crawled underneath and this is the driver's side bushing and washers from the underside, obviously not seating correctly. Can anyone advise if this is...
  6. P

    Bilstein 6112/5160 Installed

    Disregard gonna make a separate thread
  7. P

    KDSS relocation bracket

    I'm using+40 and just barely rubbed the kdss bar, I would think+25 would be perfect but every vehicle is slightly different
  8. P

    KDSS relocation bracket

    I have the same setup, what offset wheels? you should be able to clear them with the spc UCA adjusted
  9. P

    Bilstein 6112/5160 Installed

    Hey did you ever get your truck leveled out? I'm thinking of swapping my 2721 ARB coils for the bilsteins but I'm also on the 5th perch. I'm thinking maybe the Bilstein springs and a 10mm spring spacer?
  10. P

    KDSS relocation bracket

    Appreciate it! Turns out I don't need it though, was able to clear my tires by adjusting the castor more with the SPC UCAs
  11. P

    Will 285/75/17 Ridge Grapplers rub with EvoCorse 17x8 ET+40 on a 2018 200?

    Yea I just looked at it closer and you are right I have more room to adjust the wheel back and should clear the arm after that. Gonna take it back to the shop that put it all on and ask them to readjust. Thanks! Was thinking I needed the alee relocation bracket but the caster should make me all...
  12. P

    Bilstein 6112/5160 Installed

    Depends what height setting you go with in the front. Bilstein does make a spring that will lift and is softer now but not sure how much lift it actually gains. I am putting a full size 34" spare underneath and prinsu roof rack though (waiting for tire on backorder) so hoping that little added...
  13. P

    Will 285/75/17 Ridge Grapplers rub with EvoCorse 17x8 ET+40 on a 2018 200?

    Thanks, I need to see if I have any space to play with behind the wheel or not. I know it's close already though.
  14. P

    Bilstein 6112/5160 Installed

    Hey guys got everything put on finally. Here's the run down: Bilstein 6112/5160 5th perch 2721 rear springs SPC UCAs +40 Evo Dakars 285/75/17 Wildpeaks(34") First impressions: Love the way it drives, the rear springs are admittedly a little too stiff for no added weight(someone on here warned...
  15. P

    KDSS relocation bracket

    Curious if anyone has a video out there of the best way to install the kdss relocation kit?
  16. P

    Will 285/75/17 Ridge Grapplers rub with EvoCorse 17x8 ET+40 on a 2018 200?

    Just put 285/75/17 Wildpeaks with +40 Evo corsas on my 2018 lc200 and I have slight rub on driver side kdss bar. Looking back I wish I had with with a +35 or +30 wheel Bilstein 6112/5160 and SPC UCAs and front mud flaps removed. Slight heat gun treatment to plastics
  17. P

    Rear facing car seat + rear entertainment screens

    Going through this myself right now, it fits but it's not ideal at all, the front seat needs to be pushed forward to the point where it's not very comfortable for someone to sit in it. I wish it was better but It is what it is for now. Kid won't always be in a rear facing seat
  18. P

    Bilstein 6112/5160 Installed

    Ah ok, I'm planning on going 5th perch and SPC uca with 2721 rears, hoping it will be pretty level. I have removed the 3rd row also though..
  19. P

    Bilstein 6112/5160 Installed

    What's springs would you change to? What height is your front set at?
  20. P

    Replacement seatcovers for Toyota Land Cruiser 2008-2021

    Keeping this in mind for the future, do you have color that matches the lc200 terra?
Back
Top Bottom