One think you'll want to be wary of is if you have the TC installed all the way on the transmission side. I had my transmission in and out a few times last year and in my experience the alignment was only difficult when I didn't have the TC installed all the way. There were 2 removals/installs...
None of this is strictly necessary but will get your truck closer to handling stock. If you're happy with steering feel, and not experiencing any crazy wobble maybe you can just leave things alone. I have a similar lift height with Iron Man springs and have done the following. The handling...
This kit from @Outsane has the cable for one side. Kind of wanted to figure out the part for the cable alone so I could replace the stay on the opposite end with a cable as well.
https://solvefunction.com/shop/ols/products/soft-tailgate-kit
I have one of these that I'm pretty happy with. It leaves a decent gap above the rear view mirror but everywhere else is pretty sealed off.
https://www.covercraft.com/us/en/product/uvs100-custom-sunscreen.UV
You can find them on yahoo.jp auctions. A shipping forwarding service like From Japan can get them to the states but it can be expensive for something that size.
I adjusted the valves last spring so that should be solid, no clue about stem seal wear. I was seeing a nonzero amount of blowby but since putting in a catch can that's helped out and the can hasn't been filling up at an alarming rate.
I'm having a similar problem with white smoke at idle. 1994 1HD-T, 211k kms, stock other than ~16 psi max dialed into the boost controller and an unknown modified aneroid pin. The white smoke is a reasonable amount when cold and thins out a little bit but never seems to go away.
I had the...
I had a similar problem and it ended up being the transmission pump bushing had spun out of the pump and stuck itself to the torque converter which was then causing the input shaft seal to leak. If there's a bushing stuck to your TC like this then you need to replace either the bushing or the...
I actually just tracked one down on marketplace in Montana, the guy shipped it out to me today. Should be able to rebuild that one and throw it in assuming it measures up OK.
Appreciate the help folks! I've put the word out locally and reached out through some Aussie Facebook groups as well. I think I have a line on one in NZ but the guy seemed somewhat reluctant.
This appears to be what I need. A pump from a '94 or older A442F/A440. Should have 11 holes and...
I think I'm figuring some things out here...
It looks like my Cruiser and all 80 series from 1991-1995 had pumps that were PN 3503536010 which were exclusively in Land Cruisers, Mega Cruisers, and some random van. These are expensive/hard to find. From 1995-1998 the pumps were switched to PN...
My pump seems pretty hosed but I’m having trouble sourcing a replacement. The few US sources that have them are priced crazy high ($600-$1200) and overseas are $300-$450 but back ordered a month or two.
Do you have any proof of the pump being a common part? Everything I’m finding lists it as...