I have a ground on the pax side of the frame more or less under the seat area. The fuel level ground is connected there. I sanded that area down, cleaned up the bolt and ring terminals, and applied some dielectric grease, and put it all back together, and used that location for the additional...
Thanks, the responses are much appreciated. I am not an entire novice at wiring, but have some head scratching to do on the front end Around the engine bay and under the dash.
The ground thread discussion you put me on was completely over the top, amazing. I am aware of differential voltages...
Thanks Matt indeed there is only one brown locking four pin connector, on the right rear. The left was butchered with bullet connectors.
I have read through the recommended thread, indeed more grounds are better.
where do I ground the additional ground wire. There is one along the chassis, for I...
Perfect, thanks V8, I see it on the diagram now, Drivers buckle switch. My seatbelts are aftermarket lap belts, and there is no switch for it to connect to. Will see if I can ground it at the plug going to the rear harness, and see if the buzzer even exists. It’s one of these wires, and was...
On the fuel level harness, I have an additional two pin connector, green and a white with black tracer, (that’s a ground) and on my diagrams green is coming from the light switch to the side and marker lights. It came up through the floorboard grommet With the fuel level wire pair. Does anyone...
Given the state of my wiring running to the back of the truck, I will be replacing ALL that harness.
it looks to be 16 gauge, does that sound right?
this will include new fuel level sender wiring and reverse switch wiring, which I am assuming is the same 16 gauge.
and this
yes, the battery is...