Search results

If you decide to split them up , I’m interested in the right bezel.

Looking for recommendations for a lift kit for my 82 FJ60. I will not be doing any serious “ boon doggin” or rock climbing. My old suspension is worn out and sagging. I’m wanting quality parts not cheap stuff I’ll have to replace in a couple years.

Pm sent

Mine arrived today. Quality looks great . Shipmag is great to deal with . Very easy transaction and fast shipping!!

This is good news !!!

Should I use them ?

122.5mm ..... 2mm longer . Roughly 1 1/2 threads longer.

These are the ones I ordered. I’m the third owner so it’s very possible the head has been pulled before and shorter head bolts were used.

Not sure what you mean by flipping them 180 degrees . I laid them side by side and lined up the head so they were even on the contact surface and they were definitely longer .

I'm in the process of having my head on my 82 FJ 60 rebuilt. I ordered new headbolts from Toyotapartsdeal.com . Before I ordered them I checked the parts # with my local dealership. The bolts are about 1/8" longer than the ones I removed . Is this ok ?

I never did figure it out , but after taking the dash out , it definitely was not factory and the wires weren't connected to anything so out it came.

What do you guys use ?

Good info. Thanks guys.

Has anyone ever had one break trying to remove them ?

I’m about to start pulling the head on my 82 FJ60. I’m installing new head bolts when the head is rebuilt. Should I use never seize on the threads of the new bolts ? My biggest concern is snapping the head off . Has anyone ever had that happen ? Should I use an impact on them ?

Thank You sir !!!! This is VERY helpful.

Does anyone happen to know the part number for this seal ? What is the correct name for this seal . I'm trying to find it to order it but it seems like all I can find is the front seal.

Sorry guys I meant the output shaft on the transfer case . I corrected my original post . It’s dripping right before the drive shaft yoke .

The output seal on my 82 FJ60 transfer case is leaking. Do I have to drop the transfer case to fix this ?

I bought a 6 point 24mm and ground down the first 1/8” or so on the front end to remove the taper. It fit a lot better on the thin bolt head. I read this somewhere on this site. Not sure who posted it but it was definitely worth the few minutes it took to do it. Completely eliminated the...