Sounds like the rotors are glazed. Have the rotors turned or get new rotors. Lightly file the pads or go new and re-bed. If you never opened the system and all was good prior to the new pads then I bet there is no air in the system.
Don't sell the 80. You will regret it.
I have a prius and 80 combo too. The combo sorta works. The prius is slow, loud, and scrapes most speed bumps, but gives outstanding mpg. The 80 is just about the exact opposite aside from being slow.
You have 3 kids, price any new 4x4 suv with...
I have a 17.5 foot square stern aluminum canoe on the cruiser as we speak. Been using it all summer with the family.
I currently use two single bar contractor ladder racks. They were inexpensive, easy to install and (mounts to the rain rail) and holds plenty of weight if needed.
When...
Looks like a STS turbo setup. Seems like a reasonable idea after protection for the intercooler is added and the intake is moved up about 3+ feet. Nice work on an inexpensive turbo build.
At best the manifolds used from a recycler are worth $100 each. They are not worth sending to the machine shop.
Has the shop removed the manifolds from the head? I would ask for a written estimate.
I guess I am not clear on this. Rick gives me no money and I have no advantage in making him money. I don't sell this product either or speak for him.
I still have yet to see any timing datalog on your truck stock vs housing from your posts. At this point, I have no interest in reviewing...
Thanks for posting the pics and info on the parts. Was the AFR at the tailpipe for the first two runs of 14.7 checked or was that a default value? It looks like the AFR on the first two runs is 14.7 though out. I really don't think this is correct maybe it was a default value? The third run...
Happy to hear that there is some ObdII data. What was the ltft value prior to open loop? Are you using an OEM O2 sensors? I don't think anything is going to be improved but I am interested in looking a the data. Thanks
That is learning is the the LTFT adjusting to the new housing and sensor in closed loop. LTFT is used to calc the fuel in open loop. That is what I recall from about 5 years ago.
My bet is that the truck is at about 3750 rpm in open loop and dumping fuel like mad, not pulling timing unless you have acutal number data. MPH is useless, rpm are the correct value to plot as you pointed out. Have them check the stoch. at the tailpipe. My bet is that you are around 10.4:1...
Factory manual is 650 +- 50 rpm. Could care less about the 590 being 10 rpm too low. The truck is running fine for the past 62000+ miles. Look forward to your dyno charts in the am.
I am fine with the posting. CELS only trip when the sensor(s) are out of the normal operation range. For example if the bank two o2 sensor is greater than 20+% the ecu dumps a code.
This is the first dyno I have seen for the housing thanks for spending the money. I have the first gen...
Agreed that just adding more air does not equal more power, timing and accurate fueling are needed too. I would have to find the old logs to give accurate data on the direct ratio of the voltage to calculated air flow. BTW, the truck never felt like a 13% more power was added after swapping...
I make no money from the product either. Paid full price like everyone for the original unit. I never bothered with a dyno run. 4wd dynos around here 5 years ago were not common so no dyno. Max air flow I have seen with the LT MAF is around 26 lbs/min. vs around 23 lbs/min on the stock unit...
I have had to original one on my truck for the past 5 years and 62,741 miles. No CELS due to the MAF. My truck still has not "blown up".... Still the original head gasket too. I would never go back to the factory unit...
Hi Scott, it sounds like the truck might have been heat soaked and detonation was happening if timing was being pulled at 4000+ rpm. At 4000 rpm the truck is in open loop if I remember correctly with or without the Landtank MAF or stock unit. To be sure, I would have to go looking for the old...
There was a thread awhile back by a guy that retrofitted a lexus wheel to a 96 or 97 cruiser and had pics of the retofit. He claimed that the air bag was a direct swap too.
I bought the same wheel by part number from ebay. The wheel did fit the steering column but the airbag is not a direct...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.