Search results

  1. kelly saad

    #6 White to brown bodywork and paint (Tatonka)

    The project: 1. Disassemble vehicle, remove doors, tailgate and hatch. 2. Strip entire vehicle to bare metal, including jambs. 3. Replace hatch and tailgate. 4. Remove seam sealer in roof gutters, and windshield area, repair all rust. 5. New lower door skin replacement panels, Sand blast...
  2. kelly saad

    #5 Green 60, bodywork and paint (Princess)

    This will be painted the same color green. The project: 1. Disassemble vehicle, remove doors, tailgate and hatch. 2. Strip entire vehicle to bare metal, including jambs. 3. Replace passenger side door. 4. Remove seam sealer in roof gutters, and windshield area, repair all rust (A pillar is bad)...
  3. kelly saad

    LX 470 round headlight conversion and grille

    Installed the first one today. It was a prototype that I made fit correctly. There are a couple minor things I would adjust to the DXF file but it’s good to go. It’s a two piece grille and the top section is bolted to the hood. Fits a 98-02 and possibly all years but have not been able to test...
  4. kelly saad

    Wanted  95 fender flairs

    95 80 series fender flairs
  5. kelly saad

    #4, 60 series root beer brown, body work and paint

    This vehicle is having the motor rebuilt now, so they better not scratch the paint when they install it :D or should it be this :mad: ?? This will be the original color also, I am excited to spray this brown color in new modern paint, wet sand and polish it. I think it will be nice. This...
  6. kelly saad

    #3 Gray 62 bodywork and paint

    Here we go with vehicle # 3. This one has more rust that the last 2 vehicles, so it should be entertaining. The project: 1. Disassemble vehicle, remove doors, tailgate and hatch. 2. Prep jambs. 3. Repair rust in rocker/lower fender. 4. Close all holes in rocker panels from trim, and fill holes...
  7. kelly saad

    Body and paint gray 62

    62 converted to a 60 front end. This is a very clean vehicle and that is an understatement. This thing is AMAZING! The mechanical work and interior are just beautiful, much love has already been poured into this 62. I did find rust hidden in the lower doors. I have separated all the skins, and...
  8. kelly saad

    Body and paint White 60.

    Hello everyone. Many of you have seen my postings, offering bodywork and paint, and perhaps some previous work that I have done. I now have a new 2000 sq ft shop with a paint booth, so everything is moving along nicely. This 60 had rusty quarters, inner fenders and a fair-sized rust hole in...
  9. kelly saad

    Can someone pick up a set of wheels in Chandler ?

    I want to buy some wheels off Craigslist but I am in Flagstaff. I could paypal the money to you. I could pick them up within a week. Thanks!
  10. kelly saad

    Lower control arms reinforced, my way

    Many of you may have read my thread about how my lower control arm broke. I finally decided to brush away 5 years of pine needles and dig out my Toyota control arms out out of my back yard. Glad I kept them! Instead of buying the bolt-on bracket, I wanted to weld reinforcements on the weak...
  11. kelly saad

    Trail Tailor rear control arms installed

    I knew my factory arms had wasted bushings, but I had no idea how bad until I removed them. They are totally blown out, you can put the bolt in the hole and tweak the bushings side to side. The new Trail Tailor arms are fully adjustable and have the Johnny Joint, which is a huge help when the...
  12. kelly saad

    Body work and paint services offered

    I am now offering paint and bodywork for the Land Cruiser community. As some of you may know, I have recently painted a few Land Cruisers and they are included in threads here on Mud, links below. https://forum.ih8mud.com/threads/paint-job-process-has-begun.1149881/...
  13. kelly saad

    Paint and body work offered.

    Just an FYI, I am now offering paint and body work services. I have posted threads in the 60, 80, 100, and 200 forums but wanted to mention it here to my neighbors. PM me if you are interested and have questions.
  14. kelly saad

    Paint and bodywork services offered.

    I am now offering paint and body work for the Land Cruiser community. As some of you may know, I have recently painted a few Land Cruisers and they are included in threads here on Mud, links below. https://forum.ih8mud.com/threads/paint-job-process-has-begun.1149881/...
  15. kelly saad

    Paint and bodywork services offered

    I am now offering paint and bodywork for the Land Cruiser community. https://forum.ih8mud.com/threads/poppy-84-fj60.888461/page-89#post-12568111 https://forum.ih8mud.com/threads/paint-job-process-has-begun.1149881/ My offered services will include the minimum items listed below. Depending on...
  16. kelly saad

    Paint and bodywork services offered.

    I am now offering paint and body work for the Land Cruiser community. As some of you may know, I have recently painted a few Land Cruisers and they are included in threads here on Mud, links below. https://forum.ih8mud.com/threads/paint-job-process-has-begun.1149881/...
  17. kelly saad

    Paint and bodywork services offered

    I am now offering paint and body work for the Land Cruiser community. As some of you may know, I have recently painted a few Land Cruisers and they are included in threads here on Mud, links below. https://forum.ih8mud.com/threads/paint-job-process-has-begun.1149881/...
  18. kelly saad

    Paint job process has begun

    I am finally making time for this. Been wanting to paint this thing for a few years now. I originally planned to use quicksand but changed my mind to the new Toyota color Calvary blue. Not the bright, deep blue they are using, it’s the soft earthy blue on the Tacoma and 4 runner. I know, I know...
  19. kelly saad

    In town for 2 weeks. Where can I get HAM license?

    Hoping to get my ham license while here. Let me know if anyone knows where that can happen. Thanks!
  20. kelly saad

    LX 470 grille and headlight housings

    I have worked out some solutions to the weight issue of the grille on the LX 98-02. Our hood struts are rated 85lbs, and I have located 100lbs and 110 lbs replacements. This should give plenty of extra power to hold the hood up. My grille is not too much heavier than the factory plastic one, but...
Top Bottom