Search results

  1. Gengis

    A cute little african girl .

    Seen at a Joburg 4x4 center this weekend. I do not know a lot about FJ4?'s but it sure is neat and tidy. For the purists, then, the kid salesman told me that it was origional "Sir", but struggeled a bit with the ARB bumper, and was not realy sure about the tail lights. Nor am I for that matter ...
  2. Gengis

    Gearbox mount issue.

    Hi All I have resently put a H150 gearbox, soursed from a FzJ79, into my HzJ76. The engin now seems to be tilting backwards a bit more than before the swap. I had to use the FzJ mount as HzJ ( R151gearbox) mount did not fit the new box. I then tried to compare info on the FzJ and HDJ...
  3. Gengis

    Gearbox Mounts HDJ vs FzJ

    Hi All I have resently put a H150 gearbox, soursed from a FzJ79, into my HzJ76. The engin now seems to be tilting backwards a bit more than before the swap. I had to use the FzJ mount as HzJ ( R151gearbox) mount did not fit the new box. I then tried to compare info on the FzJ and HDJ...
  4. Gengis

    real time help on Hz flywheel bolt torque please.

    Hi All we are talking about a 2007 HZ in a 76. one book says 94 Ft.LBS the other as below. 94 will almost kill me, and my tools, what gives please, i need to button this up today if possible.
  5. Gengis

    Do I fit the H150 gearbox with or without the transfer case

    Hi All I will be fitting H150 box to my cruiser shortly , it has the HF1A transfer case. Now, I will be doing this by myself, probally a friend and a gearbox trolley jack (and a carry pack or two). It will definately be easier without the transfer case attached, BUT how easy is it to fit the...
  6. Gengis

    To fit a H150 box with or without TX case??

    Hi All I will be fitting H150 box to my 76 shortly , it has the HF1A transfer case. Now, I will be doing this by myself, probally a friend and a gearbox trolley jack (and a carry pack or two). It will definately be easier without the transfer case attached, BUT how easy is it to fit the...
  7. Gengis

    Some R151 / Hz measurments please.

    Hi all I am in the process of fitting a H150 box to my HzJ76, but i need to get a few things concerning the swap sorted before I pull the 76 appart. I also need to modify my new bell housing to take a gear tooth sensor for a rev counter. If anyone has an engin and or gearboxes out at the...
  8. Gengis

    I need some 1HZ and R151F measurements please.

    Hi all I am in the process of fitting a H150 box to my HzJ76, but i need to get a few things concerning the swap sorted before I pull the 76 appart. I also need to modify my new bell housing to take a gear tooth sensor for a rev counter. If anyone has engens and or gearboxes out at the...
  9. Gengis

    H151/ R151 input shaft tube OD

    Can anyone please help with the OD Outer diameter of the tube which covers the input shafts of these two gear boxes. I am changing from R151 to H151 and I need to know if the old clutch bearing will fit. I don't have the new box yet and the other is still in the vehicle, but I need to get my...
  10. Gengis

    Real time help HD vs HD-FTE engine bolt patterns

    Good day I have a crack at getting a brand new bell housing to match an HD to a H151 gearbox The bell housing is a 31111-60290 which aparently comes off a HD FTE. An HzJ80 bell housing is listed a 31111-60210 Can anyone shed any light?? George
  11. Gengis

    Pulled the trigger on a H150 box for my HzJ76

    I have just agreed on a H150 (I think) with a part time transfer case to replace the R151 in my HzJ76. I want to prepare everything before putting it in and hopefully do it over a weekend as this is our 2nd vehicle. (The DD for whoever is doing the lease distance on the day.) Where she really...
  12. Gengis

    H55F into a HzJ76... ?

    Anyone replaced the R151F in a 76 ( or any other 7?? with the r151 box) with a H55F? Just looking at my options. Say i could get a H55F with HZ input shaft. I would then need: Bell housing to suit Clutch fork and bearing Clutch slave? Cross member and g/box mount. Lengthen back...
  13. Gengis

    Plastic parts repair??

    Yes, we have to man-up and admit that out dearest cruisers do have some plastic parts. Anyone have any luck repairing wheel arch flares?? If so what products did you use for glueing and strength and for filling and priming?? Dent already looking a lot better after some hot water and Mr...
  14. Gengis

    Split case from an R151 on to an H151???

    I guess the title says it all. What will it take to fit a split transfer case from my R151F on to a H151, curently mated to regular 80 series transfer case. ?? If possible, how much would it kick the tx case back, in other words, would I have to lenghten and shorten prop shafts?? The new V8...
  15. Gengis

    12V supply to the back of a 76

    My 76 RHD came with a second battery, which was so badly mounted that it cracked the wheelarch to which it was mounted, and had 2 thin crappy wires taking the power to the rear load bed. (Note the dry joint on the earth plate). I descided to redo the entire system. There is a nice place behind...
  16. Gengis

    converting an Hz IP for rev counter pickup.

    Hi All I have tied asking this in the 70 section with no luck. This time, I guess the title says it all. My HzJ76 has no rev counter or pickup, or, seemingly provision for a pickup in either the IP or the bell housing, so what would work best for me would be converting the IP if it's not too...
  17. Gengis

    HZ rev counter pickup

    Hi all I am new to the Hz, but being the new owner of a 2007 HzJ76, i will be learning fast. What I do miss is a rev counter and I have an option of putting in a aircraft style engin monitor which has a rev counter, ( and a real temp meter) with a number of pick up options. what does the HZ use...
  18. Gengis

    Bearings and lubrication questions , R151.

    Just getting my ducks in a row for a R151 rebuild and massing loads of info from forums and transmissiom shop u tubes. The local guru here in South Africa swears by precision clearance settings and removing the bearing seals and using torque fluid454 as a gearbox and transfer case oil...
  19. Gengis

    Which gearbox kit?? 2007 HzJ76 R151 box.

    Hi All This one may not have made it to the states, but certainly popular in Aus and South Africa. I need a bearing, synchro and gasket kit, but the kits from the US do not mention the LC76 , just tundras and v6 and hilux and the like, although the guts of the gearbox should be the same. I am...
  20. Gengis

    HzJ76 ( 2007) with H151 box and permanent 4x4-Thoughts.

    Hi All I have a HzJ 76 with 320000Km on the clock and I think the curse of the R151 is looming. I have the chance to get a H151 box and transfer case from a FzJ80 and would like to fit it to my 76. Good idea bad idea? I know that the HZ would probally do better with a H150 but it should still...
Top Bottom