Search results

  1. smokymtnjoe

    Overheating

    This prompted me to give PO's maintenance records and receipts another look. Looks like I have a CSF 2517 bought in 2011. Must have overlooked it before. I'll let everyone know how this plays out. Hopefully this thread can add some value to someone making a similar decision in the future.
  2. smokymtnjoe

    Overheating

    FWIW, I am positive my radiator is metal and not plastic. The mechanic said if it was any other radiator other than brass and metal, he would tell me to get a new one. I think his concern is the structural stability of aluminum and not the ability to cool. I definitely see the reasoning behind...
  3. smokymtnjoe

    Overheating

    Well, ended up sending it to local Cruiser mechanic (thank you desmocruiser). He said the fan chipped and punched a hole in the radiator. Also said the clutch had some play in it . His recommendation was to take the radiator to a radiator shop and see if they think it is salvageable. Said that...
  4. smokymtnjoe

    Overheating

    I am 99% sure it only leaks at pressure. I have let it idle and get to temp a few times while trying to track down the leak. Only time I saw coolant was last night when I decided to drive it again. This is when I saw traces of coolant on the air cleaner and a pool at the bottom of the radiator...
  5. smokymtnjoe

    Overheating

    93 1FZ
  6. smokymtnjoe

    Overheating

    Temp gauge was just below red and it was obviously hot. I gave it some gas towards the end of the drive to see if it would cause it to heat up and it did. May not have technically overheated that time but it would have if driven longer. Pretty sure it overheated when the motor shut off on the...
  7. smokymtnjoe

    Overheating

    No noises. I have heat as well which I thought would eliminate the chance of a bad water pump but I could be wrong. Fan clutch seems fine but will look into that a little more. Head gasket was replaced as well as all hoses from PO parts receipts about 140k and it has 180k on it now. None of the...
  8. smokymtnjoe

    Overheating

    One day last week I drove about 60 miles to a trailhead and then drove about 15 miles of moderate trail (with a short section or two of steep crawling and one big creek crossing) to a property for work. Anyway, it was a fairly warm day and I wasn't easy on the truck. On my way back home on the...
  9. smokymtnjoe

    Trail Gear Bumper/Fairlead

    I ended up taking the steel Warn fairlead I had to a machine shop and they cut enough off the top for it to fit.
  10. smokymtnjoe

    Trail Gear Bumper/Fairlead

    All I see on the Trail Gear website is an aluminum fairlead. I’ll definitely check out what marlin crawler has to offer.
  11. smokymtnjoe

    Trail Gear Bumper/Fairlead

    Installed a Trail Gear bumper the other day and had plans to use a Warn steel hawse fairlead I had laying around. The bolt holes line up but the fairlead is too tall. Wanting to keep my winch cable so I need a steel fairlead. Anyone else had this issue? Any suggestions on a steel fairlead I can...
  12. smokymtnjoe

    For Sale '00 in Knoxville, TN 122k miles

    Is it still available?
  13. smokymtnjoe

    2016 Tacoma Rear Bumpers?

    Thanks for this! I live in Maryville and work as a forester for a land company in the area. We bought a couple Tacomas recently and they are used off road daily. Love the 2016's so far but we were disappointed in the plastic bumper. Plus side is that they are a 3 piece. However, we were quoted...
  14. smokymtnjoe

    2016 Tacoma Rear Bumpers?

    Anybody seen a build thread or anyone have ideas on custom bumpers? Mainly the rear. It is a 3 piece bumper and the chrome/plastic piece does not do too well when it drags across a creek bank!
  15. smokymtnjoe

    Wanted 1993 FZJ80 Left Rear Tail Light Assembly

    Just got one. I'll let you know if it doesn't work out. Thank you.
  16. smokymtnjoe

    Wanted  1993 FZJ80 Left Rear Tail Light Assembly

    I need a left (drivers side) rear tail light cover for a '93 FZJ80. Wife had a fencepost jump behind her in the driveway the other day.
  17. smokymtnjoe

    '93 FZJ80 - Shock Size - Unknown Lift

    So I took the rear shocks off and my depressed measurement with the tires on the ground is 22" and the extended measurement was 26 3/4". For the lift, my measurements were 23" in the rear (shocks removed) and 22" in the front. Would you say this is about a 2.5" or 3" lift? Fox Racing's...
  18. smokymtnjoe

    '93 FZJ80 - Shock Size - Unknown Lift

    Thank you for the quick responses. I was wanting to get this done soon and ya'll have really helped. Great community!!
  19. smokymtnjoe

    '93 FZJ80 - Shock Size - Unknown Lift

    My rear shocks are done for. I am not 100% sure what kind/size of lift I have. Can someone help me out with this project? Bought the truck in 2014 and it was already lifted. I do not trust that the last owner had the right shock size and simply just pulling the old ones off and replacing with...
  20. smokymtnjoe

    New fzj80 hesitation at low rpms

    I had the same symptoms with my '93 when I bought it. Start simple and do all of the preventative maintenance you can (i.e. sock filter, fuel filter, plugs, wires, cap, belts, pcv valve and grommet, timing, etc.). It is good to do all of this anyway even if it doesn't fix your problem. You will...
Top Bottom