Search results

  1. T

    Rocker Arm/Adjuster Screw/Oil Pressure

    Pushrods are okay. New adjusters are in. No ridges on the shaft. I visually checked the rockers and their bearings. Overall everything looks fine. I'm doing the valve adjustment right now (letting the truck get hot). I'll let you know how it turns out. At least now there is oil squirting out the...
  2. T

    Rocker Arm/Adjuster Screw/Oil Pressure

    Removed the rocker shaft and cleaned it. I went to blow air into the oil passage on the journal and it was totally blocked. So I pulled both rocker arms away from the rocker stand and slid the rocstand over...viola- somehow the rocker shaft was 90 degrees off and none of the oil passages were...
  3. T

    Rocker Arm/Adjuster Screw/Oil Pressure

    Thanks Buckwheat There is no oil to the entire rocker shaft. I will remove it later today and post an update as to the results.
  4. T

    Rocker Arm/Adjuster Screw/Oil Pressure

    Thanks for the help. It's a 2f. Got screws from cruiserparts.net at $8 ea. I will pull and inspect the rocker shaft and oil passage. I plan to blow some low pressure air through the oil filter flange outlet to verify the passage is clear, does anyone see anything wrong with doing this? Thanks again.
  5. T

    Rocker Arm/Adjuster Screw/Oil Pressure

    I recently heard an intermittent sharp tick sound from the engine and stethoscoped it to the upper end. I tore off the rocker cover and found three of the exhaust adjuster screws worn half off on only one side. This made excessive clearance and caused the pushrod to make the tick sound...
  6. T

    Rust bullet or Por-15 in Hawaii?

    Redline Automotive in Oahu carries POR-15. It's priced about the same as online and they carry all of the POR products. TM
  7. T

    Parting out 74 FJ-40 in NC- CHEAP!!

    Looking for the windshield brackets, sleeves, and screws that hold it in the upright position. Shipping to 30606. Thank You.
  8. T

    Want a FJ55- Atlanta/Athens Area

    No cash, plus I'm relocating soon. So oh well. Thanks though.
  9. T

    Want a FJ55- Atlanta/Athens Area

    hey, I'll provide a good home and give it fresh food and water daily :)
  10. T

    Want a FJ55- Atlanta/Athens Area

    That does look like a great rig, I just don't have the cash right now. Thanks for looking out though.
  11. T

    Want a FJ55- Atlanta/Athens Area

    No I didn't. Couldn't talk the wife into a vehicle that needs that much money in parts. Still looking.
  12. T

    Want a FJ55- Atlanta/Athens Area

    Let me get home tonight and email you. Thanks. TM
  13. T

    Want a FJ55- Atlanta/Athens Area

    I'm going to go out on a limb here and look a little stupid, but, oh well. I'm Stationed here in Athens for a bit and had to leave my cruiser in Mi. I would like to have something to play around with- specifically a FJ55. My wife isn't to keen on the idea and funds are tight. So if any of...
  14. T

    Anyone going from MI to GA

    Looking to bring my 40 in from Jackson, Mi down to North East GA. If anyone is going in this direction pm me and we'll talk. For an idea of what you'll need the 40 is running 39" tires with a total of 13" of lift. Thanks, TM
  15. T

    1974 fj40 fOR sALE

    Can you pm or email some pics please. xariusleloft@yahoo.com Thanks, TM
  16. T

    '78 FJ40 tub & frame

    Can you also pm me some pics. Thanks. TM
  17. T

    Toyota OEM gasket sealer

    Well guys, I now feel bad. I went out to the garage and can't locate my orange FIPG anywhere. I found an additional six tubes of black FIPG, but no orange. Sorry for wasting your time if you wanted the orange stuff, I guess I had a little pg (parts guy) syndrome going on (telling you I had...
  18. T

    Toyota OEM gasket sealer

    Bjowett I hope I don't steal this thread nor misinterpret your meaning "Dave finishes off this sale". Buy if anyone else needs any more- BTW since bjowett is now out of stock- I have around six tubes of the Black (oil) FIPG and five tubes of the Orange (transfer, axle) FIPG. If anyone is...
  19. T

    Anyone ever powdercoat the......

    Powdercoat will adhere well to other surfaces if they can handle the temperature. So far, well at least last I looked, nobody has developed a lower temp. curing powder. So, you're pretty much stuck with paint. My 2 cents.
  20. T

    Toyota extended diff breathers

    If you can freely wiggle the plug cap it is most likely that the breather is not plugged.
Top Bottom