have a complete 3.4 and 5spd from a 98 4x4 4runner I do not need anymore.
came from a running truck with about 220k on it
would like gone as a whole but will sell motor separate
$1000 for trans swap
trying to sell my project that I just didnt have the $$ for.
92 1uz ran when I pulled it from a SC400 with I believe 180k
complete wiring with more than youll need & ecu
ebay adapter bellhousing to adapt to w58
w58 from a 86-87 supra NA
pictured with rearsump pan, now has front sump from...
recently put clear turn lenses on the front of my 94 2wd and didnt want standard amber 1156 bulbs as they just look like c.r.a.p behind the clear lense. So I bought a pair of ebay special 20led 1156 bulbs that look great behind the clear lenses just werent putting enough load on the flasher so I...
blew up the 3.0, refuse to put another 3.0 in it and cant find a cheap enough 3.4 manual swap. So just seeing if itd be worth my time just to part the pig
clean tan SR5 interior
rusty light metallic green exterior
basically everything could/would be available, just post what...
1st set (5)16x8 Mickey Thompson holes 6 lug yota pattern very clean (this is a generic pic)
No center caps
$300 for 5
(4) new take offs from..whatever these would've come on in the 90s wheels and caps basically new
(4) these came off of a 85 4runner cleanish comes with...
my old thread that was closed
FINALLY got back around to working on this thing after building a motor for my ae86 and trying to find a decent job (still looking).
anyway as she sits now.
-93 2wd frame
this is the new RC crawler Im building...just started graphing it out today....it is actual size whats pictured...12" wheelbase 2.25" ground clearance....its going to be awesome...
my inspiration....anyone have more pics of this truck?
working on my never ending project. This weekend I was going to tackle cutting the hole for the rear of the front leaf on my 94 2wd frame. I ordered the frame jigs from sky-manufacturing.com but when I held them to the frame they were to narrow and didnt even look like they would line up.
20/22R awesome running motor
-cannon intake mani for weber
-weber 38/38 with K&N
-?? bigger cam
-3angle valve job
-83 bottom end with OE domed celica pistons
-on propane or GM EFI this thing would be a little monster!
--$500 was running when pulled...
169,xxx miles 2.5L dohc automatic
ALL gaskets replaced within last year (including HG) all with OE subaru parts Tbelt at same time also. Runs and drives awesome
looking to trade for 90-95 p/u 4x4 with 22re 5spd, tacoma, or 3rd gen 4runner would obvisiously be interested in putting some money...
blew up my 3.0 and Im scr.aping my 85...so I figured Id be cheap and put the built 20/22r in my 90 runner:p...anyway will the 3vz bell bolt to the 22r? or will I need to take the bell off my 85 trans?
Have had this thing for almost 6yrs but I just cant mentally handle any more projects.
1985 solid axle 5spd
rust free doors & hood
good rear end
fresher front end
clear current title
needs frame attention
needs some brake lines
really really really dont want to sell but dont want to fix and/or replace with another 3.0, and cant afford a 3.4swap right now.
name brand rear 3" springs (cant remember who there silver, pro lift maybe?)
trail-master front 3" lift kit (dropped diff and all)
blew up the 3.0 :whoops:in my 90 4runner 5spd and have a chance to get a very cheap 3.4 auto complete...
Ive done some research but have yet to find any specifics on what it takes as far as wiring goes. Im not afraid of the powersteering lines or the exhaust. I just want to know how hard it is...
sounds like I may be getting a cheap 1uz from a SC400.
besides the harness ECU and engine will there be anything else Ill need from the donor?
what bellhousing can I use to bolt to a stock 90 V6 tranny?
have had all-pro hi-steer for a few months (in a box), and Im about to be tearing into my project. As I was just reading on marlin's site you need at least 4" of lift to use their hi-steer. If I plan on using 92 rear leafs on the front of my 93 2wd frame....will my all-pro kit work?
or am I...