For Sale Cruiser/Mini upgrades/parts...doubler, 2F, lockers, winch, gps, etc.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 2, 2004
Threads
12
Messages
89
Location
United States
Cruiser/Mini upgrades...parting built toy axle, doubler, 2F, lockers

DROPPED SOME PRICES - 6-27

I'm leaving the country for awhile and I'd like to clear some stuff out. Motivated to sell.... I'll ship but I'd prefer if you got your own shipping quote. All stuff is located in Pennington, NJ. Zip is 08534. I can get weights on the small stuff. Large stuff is guess work. All prices OBO.

Parting a built mini axle, continue below....


FJ55 rear leaf springs
Need new bushings. I might have added another leaf to these, but I can't remember.
$100
GQkRs.jpg



SO FJ60 front axle with FJ55 front leaf springs SOLD
Fully rebuilt except for 4.11 third.
4x4 Labs Hi-Steer, Chevy tie rod ends, tie rod, and draglink
Knuckles cut and turned, spring over configured
SOLD
t2VwA.jpg



Dual battery bracket setup for FJ55
$50
I made this to fit dual Optimas in my '78 55. Includes dual battery bracket and brackets to move other stuff that's in the way. No promises on how it fits your 55. You can have what's in the picture, but one of the bottle is cracked, and I won't ship the charcoal canister.
4tWtx.jpg



FJ40 steps
$20
Looks like good shape. Surface rust.
CpxaB.jpg



20 Energy Suspension spring bushings - PN 2032, probably bought for my '78 40 - SOLD
Clutch fan - SOLD
FJ55 Sway bar with links - $80
3 body badges -SOLD
40 rear heater - SOLD
4spd t-case - main case only - $30
89tbB.jpg



FJ40 spare GONE
Tire probably no good
GONE
haxaf.jpg



Hoses SOLD
Some better than others
SOLD
N4QQ9.jpg



2F header
Came off a 40. I was going to make it fit my 55 (I didn't finish this), so I sliced the second tube partway, as seen in the picture (slice is on the opposite side, but you can see the ends). Needs a patch welded over it to work again in a 40. Collector has a dent in it.
$35
sjofG.jpg



22RE header
$30
F0W69.jpg



2 4 speed transfer cases
One has a lot of rust on the output splines, no ebrake, possible water inside
Good for the case parts
$50
Other has no ebrake and is in better shape.

2f Engine
PO said it has around 78K on it. Ran fine.
Has brackets for York, Volvo PS pump, Caddy alternator, and Ford large case alternator. It will come with the Volvo PS pump and a Caddy alternator if I can find it. Brackets worked OK, but if I ran again, I might beef them up a little.
$300
IhNLE.jpg



SM465/doubler setup
Includes Chevy clutch disc, clutch fork, modified F bellhousing, SM465, NP203, 4spd transfer case with 3spd gears, massive t-case brace, and triple stick setup.
Great setup. It's been sitting and I think everything should be resealed prior to use. I might have most of the seals you need. I can also add in a '78 FJ55 extended speedo cable - might work in a 40, as well. I think most of the t-case brake is gone as I was trying to build a working Caddy ebrake setup (never again!!!!) I built the triple stick setup which worked great - but - I wanted all the levers to pull back, so I made a mod to some linkage that isn't aesthetically pleasing at the moment. Can probably switch it back pretty easily.
$750
kb7pA.jpg



Warn M12000
Moved here.


FJ55 Rear Heater
Slightly modified to fit my doubler setup - I trimmed some metal of the mounting ears.
$30
UxmPU.jpg



Garmin GPSMap 60CS - SOLD
Includes manual, power cable for car, suction cup windshield mount. Has some light scratching, and there is a spot, mostly out of the field of view, where it was rubbed in my pack one day. No maps besides the base map. Does not take memory cards.
SOLD
 
Last edited:
2nd on ARB is it for a 40? Part # ? Is it new in the box?
 
Toy electric locker - SOLD
New bearings/5.29 gears setup by Toy tech
I have a harness I got with this that goes with it - it's the homemade version.
SOLD
17beC.jpg


Ok8hE.jpg



Front axle housing
Came with above locker
Trail Gear diff armor
$100
2gU18.jpg


LcT6E.jpg



Hi-Steer
Looks like Trail Gear
TREs are tight, boots need to be replaced, one TRE is missing a zerk.
$260
rnc07.jpg


Jbiu9.jpg


2YzAX.jpg



Trail Gear drive flanges
Comes with flanges, o-rings, caps, and drilled and pinned IFS hubs.
Rotors are pretty new and will go with the flanges for another $50.
One flange has a small piece broken off - see pics.
$120
hZIS5.jpg


xO9lD.jpg



Knuckles
Upper studs are newer Toy
Calipers flanges drilled out to 1/2" by PO to mount calipers outboard.
I think a spindle hole or two will need to be helicoiled.
$30 for the pair plus lower caps
H2wEq.jpg



ARB air locker RD132 for Toy mini
Little scuffing on the case....
Think it might be missing a thrust washer.
$400
tt8iw.jpg


rPNgD.jpg


v3LXv.jpg
 
Last edited:
DROPPED SOME PRICES - 6-27

I'm leaving the country for awhile and I'd like to clear some stuff out. Motivated to sell.... I'll ship but I'd prefer if you got your own shipping quote. All stuff is located in Pennington, NJ. Zip is 08534. I can get weights on the small stuff. Large stuff is guess work. All prices OBO.

Parting a built mini axle, continue below....


FJ55 rear leaf springs
Need new bushings. I might have added another leaf to these, but I can't remember.
$100
GQkRs.jpg



SO FJ60 front axle with FJ55 front leaf springs
Fully rebuilt except for 4.11 third.
4x4 Labs Hi-Steer, Chevy tie rod ends, tie rod, and draglink
Knuckles cut and turned, spring over configured
$550
t2VwA.jpg



Dual battery bracket setup for FJ55
$60
I made this to fit dual Optimas in my '78 55. Includes dual battery bracket and brackets to move other stuff that's in the way. No promises on how it fits your 55. You can have what's in the picture, but one of the bottle is cracked, and I won't ship the charcoal canister.
4tWtx.jpg



FJ40 steps
$20
Looks like good shape. Surface rust.
CpxaB.jpg



20 Energy Suspension spring bushings - PN 2032, probably bought for my '78 40 - $20
Clutch fan - SOLD
FJ55 Sway bar with links - $80
3 body badges -SOLD
40 rear heater - SOLD
4spd t-case - main case only - $30
89tbB.jpg



FJ40 spare
Tire probably no good
Free
haxaf.jpg



Hoses SOLD
Some better than others
SOLD
N4QQ9.jpg



2F header
Came off a 40. I was going to make it fit my 55 (I didn't finish this), so I sliced the second tube partway, as seen in the picture (slice is on the opposite side, but you can see the ends). Needs a patch welded over it to work again in a 40. Collector has a dent in it.
$45
sjofG.jpg



22RE header
$40
F0W69.jpg



2 4 speed transfer cases
One has a lot of rust on the output splines, no ebrake, possible water inside
Good for the case parts
$50
Other has no ebrake and is in better shape.

2f Engine
PO said it has around 78K on it. Ran fine.
Has brackets for York, Volvo PS pump, Caddy alternator, and Ford large case alternator. It will come with the Volvo PS pump and a Caddy alternator if I can find it. Brackets worked OK, but if I ran again, I might beef them up a little.
$300
IhNLE.jpg



SM465/doubler setup
Includes Chevy clutch disc, clutch fork, modified F bellhousing, SM465, NP203, 4spd transfer case with 3spd gears, massive t-case brace, and triple stick setup.
Great setup. It's been sitting and I think everything should be resealed prior to use. I might have most of the seals you need. I can also add in a '78 FJ55 extended speedo cable - might work in a 40, as well. I think most of the t-case brake is gone as I was trying to build a working Caddy ebrake setup (never again!!!!) I built the triple stick setup which worked great - but - I wanted all the levers to pull back, so I made a mod to some linkage that isn't aesthetically pleasing at the moment. Can probably switch it back pretty easily.
$750
kb7pA.jpg



Warn M12000
Includes roller fairlead and controller. I don't think it's ever been used. I'm the second owner and had it sitting on a shelf....
Has some light paint splatter (black). One of the lugs popped off the neg cable.
$800


FJ55 Rear Heater
Slightly modified to fit my doubler setup - I trimmed some metal of the mounting ears.
$30
UxmPU.jpg



Garmin GPSMap 60CS - SOLD
Includes manual, power cable for car, suction cup windshield mount. Has some light scratching, and there is a spot, mostly out of the field of view, where it was rubbed in my pack one day. No maps besides the base map. Does not take memory cards.
SOLD


How much to ship the running boards to 84790 St George UT. Thanks.
 
Back
Top Bottom