Recent content by xssfox

btw, before reassembling ours, I took a bunch of close up pictures of the microswitch as I thought I might need to 3d print a replacement in the future. I haven't created a model for it but I suspect a fairly standard switch could be used provided that it makes when the metal guide runs across...

for 4hi/4lo the microswitch probably isn't used but the cdl most likely is - cdl is not something I had to troubleshoot so I haven't even opened our one.

If the switch is removed entirely (at least with our 2008 landcruiser) there are no faults. I tested running the newer (though wrong position) assembly that doesn't have the switch and there were no faults. (though important to note that this is only for 4LO/4HI operation, CDL is likely a...

Just finished fixing a weird 4LO/4HI actuator issue and wanted to share some of my findings. Regarding the microswitch - at least in our LC200 2008, it's not needed, even though the original did have it. Looking at the wiring diagram for this, I believe it might be used to signal an A/T/P (aka...