Recent content by Tobiasinla

Maybe if it was an M416B1....and perfect condition. I found this info when I had a chance to buy one earlier this year, but it had no title, so no dice in this state...... That one had a tailgate cut in it and the lunette cut off of it already. The only tell tale left was the really offset big...

Looks like you have the M101A1 setup. Did you throw a tape measure on it yet? (Just the taper would tell.) Also though the 105's had dolly wheels, but not sure if they all did. Does the drawbar ( or "mating female receiver") have any casting numbers on it?

Hey e9999, Any chance of getting another picture without the wiring being draped over it? I am still internet surfing for M105 pictures, but I cannot see the "mating female receiver" coming from a style of M105 like scrapdaddy posted in the other thread. Maybe it was an early model 105 part?

Well, for the future searches, here is the M416 NSN 2540007328311 ITEM NAME COUPLER,DRAWBAR,RING THREAD DIRECTION RIGHT-HAND SHANK LENGTH 6.750 INCHES NOMINAL RING INSIDE DIAMETER 2.969 INCHES MINIMUM AND 3.062 INCHES MAXIMUM THREAD LENGTH...

They make "drawbar" tubing just for this. If you buy 2" square tubing, you will have to knock the corners off of it to make it fit. I had fun informing the engineers this while the welders were busy wasting time grinding to fit. So you looking for something like this? Hitch Extender Hitch...

If your worry is the hubs clearing your rims, depending on your relationship with your favorite parts store, they can order one up to see, and you can see if it will clear in the store. No cost. With the price of scrap cleaning out the landscape, not sure if you would find one in the salvage...

Unless they used the 1/2 ton Ford TTB spindle, which is 6 hole. They have a different offset so you cannot use them on a solid axle, but for this, since there are no brakes, I don't think it matters. Building a custom hybrid front axle So e9999, find someone around you with small...

Pictures? Military Vehicles For Sale | Military Trucks For Sale-TNJMurray TRAILER DRAWBAR M101A1 P/N: 7735482 Condition: N.O.S. - New Old Stock Vehicles: TRAILER $85.00 ( they had it on sale for $40 when I got it.) I am still waiting on other parts to arrive...

M105 and M101A1 do not rotate. The pintle rotates on the vehicle. Only the 1/4 ton trailers have lunettes that rotate. Do not know about the Canadian M101. M101A2 and above have surge brakes. I am also under the impression that the tapers are also different, so you couldn't insert a larger...

Hey Dell, so what benefit you getting by doing this? It looks like it is still at the same height.

<Darn, didn't type quick enough....> Why? Bolt goes from being in shear to shear and stress, but probably not a big deal. The mfg web site doesn't give the numbers for the movement in angles. ( Or i didn't see it. ) It looks like you will limit the upward travel of the trailer, where...

Do you still have this?