the point of the post is to enquire if i can run an oil line from OTHER THAN THE SNAPPED OFF OIL SENSOR LOCATION that would give true oil pressure. Not where i can promenade my after market gauges. Thx
Guys my oil pressure sensor has snapped or been broken off at the block by the previous owner of my recently purchased hzj75 T/T.
All that can be seen is a few threads protruding from the threaded hole and is a very difficult to remove the remaining stump. Strangely there is no leakage of oil...
I have posted a total of 5 pics (attachments) to posts here over 18 months or so and i wanted to attach a pic to a recent post but cannot due to attaining my so called (maxium allowance).
Anyone know how to get rid of these existing to allow new attachments?
Seems a bit poor if you can't...
Hello guys,
Been wondering why the oil pressure needle in gauge on the hzj 75 1993 T/T goes from below bottom of the gauge to top of gauge then when i turn the ignition on, then when i start the motor it resumes it's initial position and falls back below the bottom of the gauge again.
MMMMMMM...
Guys, some1 will be able to answer this easy question in a minute flat.
I'm finding it impossible to locate a windscreen frame for my HJ 75 tray back/ute.
I was wondering if the HZJ75 tray back/ute frames would fit as it's more recent and threre's some about $sale.
THX
p.s. this is the aussie...
trans/gearbox oil seal
Sorry to inform you Rosco but it worked just fine 4 me
I had a free flow of oil from g/box to transfer and out the plug hole on transfer case when filling g/box if both plugs were removed whilst filling gearbox.
I filled the transfer case to plug plug hole level and...
thx grant and RPM
just bought the beast last week from a 'roo' shooter in the wheat belt in west aussie, reckon he might have saved bullets and just run them over with that bar attached.
the unit goes well with plenty of rattling sounds ha ha do you think i could just crimp that oil line off...
Hello to all on this great site,
The cruiser is a 1981 hj47 tray top engine is 2h, all the rest is a mystery.
there is a power steering unit fitted and this turbo thingy that only whistles when changing through gears.
I read in the forums about many things about turbos like boost, intake even...