Recent content by Pontipine

Thanks Mike I will remove the spacer and look into the strut mount bushing thickness. Note I did not tighten the top nut so that should compress the bushing. I will report back on where I get. The good news is that the strur will be easy to assemble without dealing with spring compressors, and...

@crikeymike I finally manged to get the twin tube shocks and the stock height springs. It looks like the shocks are too long for the springs. The GS59-710 front shock/strut with the C59-474 stock height springs. The spring can be mounted without a spring compressor and there is a 1 or 2" gap...

@crikeymike , I see the standard height rear springs are also backordered. Any idea on the ETA for these? Or same spring wire shortage issue?

Thanks Mike, Slightly increased spring rate is OK. Variable rate coils would be ideal but you only have the 2.5" . I just measured my Sequoia hub centre to fender height. 21.5" Front and 22" rear. This is with 205,000km so that seems kind of high for oem kit. I will have to read up on what...

Thanks. Are the replacement stock height springs the same spring rate as stock?

@MagmaFJ Did you ever get this sorted out? I am looking at redoing the suspension on my 2014 with 200,000km on it. @crikeymike I see there are more options for Sequoia springs. You have stock height, 1.75 and 2.5" springs. So with the twin tube and IMS/IFP options there are six possible...