peesalot's latest activity

replace the position sensor

Thats it, the controller is where you get the ability to expand system. For example I use a very simple( idiot lites, no read out/screen) controller rated at just above my solar input and I just went pos to pos on the dual batts. A better...

FWIW, in the OP you kept saying" 18 watts ) which as shown in your pic of controller is actually V. 17 volts is low, like shaded or evening time. 18 to 21 is oper range in my exp. Does your controller have a charge indicator aside from the...

Thats a great deal IMO. I dont like folding ( fails where they bend ) . Other than that its a great package and can be used whereever needed, cabin, boat, truck, car, I like that aspect.

For that size dual zone you will need 200watts of solar and 2 batts or 1 really good one & sun to be able to run standalone ( no vehicle running ) indefinitely. You could probably throw in some Starlink time & led's at night & still recover full...

See, I knew there is more to the story, I wouldn't be suprised if he was mixed up with Baker, & Grogan some how...

That Jonheld strikes me as the crafty, devilish type.

Looking forward to our next meeting, glad you guys made home safe, well done.

I don't think I would spend that much money on one even if I hit the billion dollar luttery by myself, come on seven. Still have a soft spot for the 917S and a Ferrari but I'd bet on a dozer, back and track hoe. That way I could dig a moat and...

FWIW, I use an engel mt45 and in good sunny days it takes a 60watt panel to "keep up" and thats on moderately hot days. add in hotter temps and it takes 68 watts at peak perf to " keep up" when fridge is on a 50% duty cycle ( kinda worst case...

Take the pass side of the tcase mount over the front dline, not under.

Thats right, for some its not alot of money at all. I guess more to my taste is that if I were spending $200K or more I much prefer to see what WFO or FC187 would produce. Also not impressed with the drivetrain.

Hey, those hoses are gonna rub on the bib, " it'll be fine " .............. My front axle was full of water, other than that it was business as usual. I did confirm that over a weeks time, sitting in decent sun, that 150watts of solar & 2 batts...

Drain the earl first. Sometimes there isnt enough room between tcase and frame to get the selector housing off.

IMO thats just stupid money, you can build an FJ40 for much less, wether you are building an oem stocker or a rock crawler. There isnt anything great or special about those $250K FJ40's. Now if they had cantilever coil overs and a hybrid...

Isnt the fuel pressure regulated at the rail ?

I am looking to replace frame rail pump and need a smaller aux tank so will probably just use a small 7 psi elec pump to transfer aux to main, that in tank gm pump is rated to run a 6.0 ls ?

Curious what the cost for the parts to put gm pump in stock tank ended up adding to ? FWIW, when/if you flex that 40 the bib will want to torque, keep an eye on it to see if the alum edges where fenders bolt isnt distorting or the mount bottom...

I need the 56 x 60 at tcase due to the sm420 and no spud shaft adapter. FWIW WFO has flanges drilled for multiple patterns, nice units.

LOL

Do you know what year the 4 runner dline was from ? I am suprised the slip matched, thats good info.

Put some sort of rubber or other material between frame and tank, not enough to trap debris but something to prevent steel frame from rubbing tank.

Wheres Jonhelds other hand ?? Dan all cleaned up & back to work. You boys are having quit ethe adventure, enjoy, hope to see you soon.

Dirty Dozen is therapy for me, that little swimming hole & DD are home for me as much as my house.