Recent content by Oldharoldelaney

When I had this it was a dirty electrical connection to the sensor in the rear passenger wheel. I don't have a photo or anything but I'm pretty sure I found that suggestion in this thread or another similar thread. Unclipped the connection, sprayed it with DeOxit, reconnected and the lights...

19 turns seems like a lot to unload after reading about how these old bars sag and need to be cranked up. I'll give it a shot though, thanks.

After cross leveling with TBs, adjusting sensors such that all corners are level, and flush per paddos method, front pressure sensor reads 3mpa-g, rear 7.6, and accumulator 10.3 in TS after going from L to N. Can this be right? Do I really want to crank down the TBs to try to bring the front...

This was the right move. I discovered that the arms that attach to the sensor came unseated from the shaft key. However upon re-seating them I found that the LH sensor shaft is misaligned and now has an incorrect range of motion: [image removed] It should be like the RH sensor: [image...

The nut didn't come off. It spins with the threaded shaft, perhaps due to corrosion. I can only assume that the threaded portion connects to the sensor contacts, hence the change in values as I turn it. Thanks for the info on the heim and number of threads. Mine started at the bottom of the...

I came looking for answers to a similar question, so maybe the answer to mine can help both of us. I had everything balanced L-R via TBs before I started adjusting height sensors. I had trouble getting the sensor to move within the adjustment slot, so I turned this nut thinking it would help...

I saw someone said apply heat and penetrant to the bolt head, but looking at it I was thinking about doing penetrant at the yellow arrows and heat at the red, on the nut. Is this wrong?

I had C0210 right rear speed sensor code. I fought with the sensor for more than an hour to pull it from its housing, cleaned it thoroughly and reseated. Issue remained. As I was looking at replacements online I noticed the connector at the end opposite to the sensor. Went outside, found it...

Yea I went to FL for it. Decided to delay the pics until I got new shoes and the running boards removed, but here ya go. Thanks for the recos hopefully I'll get out there soon!

I'm going through this now as well. Is there a real risk of shearing this bolt? Consequences?

Well I got one, '06 LX470 with 127k miles. Pretty clean, but I have some work to do. Looking forward to getting it ready and hitting some trails soon. Where are some good spots in LA / MS?

What an awesome day! I got my first LC and met two great people. Thanks @kpecks for your hospitality and patience while we checked her out (and for saying I'm cool 😎). And @musthave thank you for taking time out of your weekend to help a stranger and pass on a bit of your bountiful knowledge...

Sent you a PM.

I'm maybe making my first LC purchase this weekend in the Tampa area and was wondering if anyone would want to help me check it out (I'm coming in from out of town). I'm willing to compensate you for your time. PM me if interested.

Hoping to stay below $15k, and the higher the miles go over 200k would need to be offset by immaculate service records and cleanliness.