msapers's latest activity

Way, way faster and a much much better and uniform surface finish. This was one single pass moving slow. Maybe 30-45 seconds total.

MAJOR UPDATE: We've decided not to remove the body and will proceed with the mechanical end of things as driving and enjoying the rig is far more important to us than shiny paint. This turns the project from a multi-year frame off to a 6 month...

I bought a Surface Conditioning tool from Harbor Freight and tried it on the bondo/rust. Surface Conditioning Tool This thing ROCKS. I would 100% recommend it. It quickly chewed through everything, leaving a nice smooth surface. This was...

I'm in the same place with my 72 right now. I'm thinking wire wheel, rust converter, then whatever surface finish i finally land on. Likely flat rattle cans for now.

Wait, those bumperettes are still available new? Would you happen to have a part number?

You might have water coming out of the overflow nipple and running down to where you see it pooling. Do you have a recovery bottle? If not, try running a length of hose from the nipple to well under the truck. That way if it's coming out of...

Here ya go. https://forum.ih8mud.com/threads/fjfordy4dr12v-purists-turn-your-eyes-away-from-this-one.1337672/ Thanks all for the kind words, and make no mistake I have high admiration for someone who can put one together as original, it’s a...

For what you're intended use is, it's a pretty good starting point. 33x 9.50 or 33x10.50 on stock or dimensionally equivalent wheels will fit. 12.5 or wider will require rear fender trimming. Your drivetrain will hold up to 33's or 35's no...

Dude, that's just plain awesome! Do you have a build thread?