Recent content by Mr mmg

Anyone using heim joint tie rod ends with misalignment spacers

Ive got Total Chaos UCAs. Running a 4 " lift with Superior Engineering mods as well. The angle would be better if tie rod ends were mounted above instead of under the spindle

Hey guys. Anyone experience bump steer due to lift (3" and up). Anyone done a tie rod flip with a kit of some sort? There are kits for jeeps but nothing for the lexus /prado that i could find. Thanks

It helps with better acceleration. The lag between pushing the pedal and getting the power is reduced when you're in the sport setting. The lag can also be increased in off road conditions when you want to take it slow and easy on the rock climbs.

Installed the IDRIVE pedal booster today. Wow... What a difference on take off.

Sorry bud.No link. They were made up by a local suspension shop. Ill try to post some pics

Anyone with Total Chaos UCAs will know about the annoying squeaking sounds coming from the bushes and/or uniball. Had my bushes replaced with 1 piece poly bushes. Squeaks gone for now.... Hopefully it stays away for a while.

fitted a Davies Craig autotrans oil cooler. helps keep trans oil temps down during heavy towing.

I'm running these tires. 285/70/17. They are very quiet on tar for a MT tire, better than the Bighorns I had previously. Good on the wet tar and performs well off road. Did an overland trip through Botswana (our neighbours) and the roads were pretty bad. The Razrs never skipped a beat and...

Portal Axles....🆒

I've had no issues wrt VSC with the aussie locker in. Everything still works. If any slip is detected, the VSC kicks in (on tar) and the rear locker does not lock up. When I hit the gravel I engage CDL and then VSC is off. I can still hear the clicks of the locker (especially around a...

I think it's mostly my fault for loading up the camper to the hilt especially at the front end. I've since upgraded the suspension to a 4 inch lift with Xtra heavy duty coils in rear. We travel fully loaded with 4 kids so things get kinda heavy :)

Hi there, I had the Total Chaos UCAs in front with 33s and a 2jnch lift. Wheels are mickey thompsons with 0 offset and there's a slight rub at full lock. I've recently done a 4 inch lift and there's still a very slight rub. I think choice of tyre plays a part here. I'm running Maxxis Razr MT...