Recent content by LXGus

Agreed! All great info! Thanks for taking the time Marques to hit all the details.

I didn’t look in the radiator. What would I be looking for? I had the same question regarding the cap with an overflow. I saw another thread and someone was throwing shade at the person posting who didn’t replace the stock radiator cap with a new one with an overflow 🤷🏼‍♂️

Topped the tank off and looked everywhere. Spent a good 30 minutes underneath and didn’t find anything. I’ll monitor the level and if it drops again soon I’ll follow up in here.

You’re right. Let it sit over night and checked it. It’s very low. Should be fun to figure out where it’s leaking. I’ve also read a few posts about an replacement radiator cap with an overflow - does anyone have a picture or link to one?

I started this thread - because I just noticed the issue and was wondering if it's normal before I start investigating.

Wondering if anyone has had this issue. I don't typically look at my temp gauge much, but today, after an oil change, I ran errands and randomly glanced at my gauge. It was at red and moving towards the H. It stayed for 10-20 seconds and dropped back to normal. Another few minutes it did the...

Just curious if anyone knows if the pads are different? Image from a previous brake pad / rotor change.

Cool! I think they had a Black Friday sale and last year it felt like they kept extending it through Christmas? It lasted a while…

Right on. Have fun out there! Either way, I’m a fan of the old-school steelie look. If you wait, Fifteen52 has holiday sales - buy 3 get one free. I have all wheels / tires and rotate the spare through so in theory, I’m getting more mileage from the set.

That’s a strong possibility. Maybe slightly smaller diameter as well. It didn’t rub very much, and only when the wheel was turned all the way while backing up for some reason. At some point I may consider a bumper upgrade so the liners will be fully modified then. I promised myself I would make...

I fell in-love with those wheels before I had my 570 and couldn't wait to put them on once I had it. Still love them. I had to do some minor wheel well liner molding and I removed the front guards, but they're great. No complaints. I've been aired down for days below or near 15 PSI, lower when...

I installed them. Greased the shims and installed the springs and clips the right way. At least the way they were on before, and from what I can see on various YouTube videos. I know they shouldn’t be as loud as they are. They’re easy to swap so I’ll try another brand.

Thanks! Does that box come with shims and clips and all that stuff as far as you know?

Just replaced my front pads and rotors with OEM from the dealership. Nothing fancy, just stock brakes. But the front pads are crazy squeaky. I took it to the dealership and a second opinion mechanic and they both shrugged it off and said maybe they just need to wear in a bit. It's been about 2...

I love the look of steelies but wanted something a little more modern and less common - Fifteen52 Anologue wheel. No spacers or anything, just fits right on there.