Recent content by laserturbo91

Pretty confident I’ve been in that same spot, that you shoehorn into. Take 550 south out of Ouray. While you can still see town, there is the Amphitheater Campground Rd on your right. Maybe 1,000’ after you turn off 550, you turn off the road to the campground proper. Plenty of dispersed camping...

@bloc thank you for the tip. I didn’t remove the fan/shroud/radiator, just came in from the wheel well. Had to wrestle the pump out but with your insight, was able to hammer on that little guy (now with room) to make install a breeze. @Bryanseye I tried your method but I think there was too much...

Paul, sounds like you have it taken care of now but have you seen the solution from KC Hilites?

Hey, @kevin in okinawa or @afgman786, I just settled up my dues. Would I be able to get access?

Some old pics from 2018, ready for all the adventures. Both Wilderness Systems, 12’ Tsunami and 10’ Tarpon. I find being able to walk around on the Gobi rack to be pretty darn great. Makes securing the ‘yaks easy with the height of the truck.

Oh, I was at speed. The truck above 40mph or so would start bouncing, oscillating around in the rear corner. Felt like driving without a shock in that corner. When applying the brakes, the truck would sway side to side, almost pushing me into the other lane.

Man, great catch!

Good observation! And negative, no frame mounting point modifications.

🤷‍♂️. If you’re saying it was over torqued, I’ll blame that on Mr T. I was in a time crunch so had a local dealership install the whole setup prior to a trip. If it bound up due to design, I’ve got nothing for that.

Icon was responsive and promptly replaced them without any issues.

The Goal Zero connector from 2022, looks like I used dish soap as lube. Before this years LCDC, I pulled 4-12awg, 1-6awg, and 1 cat-5 all in one go. Let’er rip, tater chip.

With the size of the Goal Zero EC8 connector I pulled through my firewall, you’ve got nothing to worry about. I did not worry about shooting for a nipple in the grommet, just poked an opened up hanger through. It’s a pain and a bit messy (to undo mostly) but I used a bunch of electrical tape...

@PhuckItImDone going quick if you think it may be in the cards

Working!

Mind posting the link you used? On the website, the link isn’t working for me