Recent content by krom

How is the build coming along? Were you able to take any pics of the sub mounting? Thanks

They are clear 1-piece Depo housings purchased from @ranma21 a few years ago.

I thought I read that swapping the factory amp for a good 5 channel amp helped with the noise issues.

You’ll need an aux input. FM transmitter doesn’t sound ideal for quality.

Nice! Did you mount the sub some way to the original sub mounts or just place it in there?

There are posts in both threads about retrofitting 1-piece Depo housings. https://forum.ih8mud.com/threads/diy-land-cruiser-projector-retrofit.1000343/ https://forum.ih8mud.com/threads/how-to-hid-projector-retrofit-on-a-100-series.491657/

May be just ripped foam. My door speakers were rattling from bad foam. Pulling the panel to inspect would confirm.

https://forum.ih8mud.com/threads/replaced-the-speakers-in-our-03-100-write-up-including-sub-replacement.821896/

I had to install a vaistech in my 05LC to be able to stream audio over Bluetooth. My factory Bluetooth won’t stream audio just allows hands free calling. You’d need that BT45 or a vaistech to be able to stream the audio over Bluetooth to that device if you don’t go with the aux input method...

I am not running parking lights in that location. It is pretty well covered up by the Iris shroud I chose for my Depo retrofit with D2S projectors.

I've been running the Morimoto 2stroke LED in the DRL/high beam for a year now with some D2S HID retrofits in a 1-piece Depo housing. @Luke111 and @jerryb were very helpful with the wiring harness and resistor to get it all working. My DRL/high beams are slightly out of alignment while my HIDs...

I have an 05 LC with JBL and just updated the factory sub with the same 6.5” Skar. Look at @KY Tundra most recent posts in this thread jus a few posts back. I bought the 4ohm model and wired it up exactly as the factory sub was wired with 2 voice coils and 2 pairs of wires. The factory sub I...

Just caught up on this thread and am considering this modification for my 05LC but it sounds like LCs are having more issues than not. Are there any LC success stories yet? Seems like mostly LX and GX that are having luck so far. Thanks for all the good information.

Do the hazards and turn signals share the same flasher relay or are they separate? My hazard light flash but the turn signals don’t. Fuses all look ok.