Recent content by justinlyman

Those TuxMat's look nice, but at this point I am just happy that we have any molded options. I prefer the husky liners personally, if they made some for the 80 I would switch.

For tow mirrors, look into the Clearview Mirrors, I don't run them yet, but plan to eventually. For all weather floor mats there a few options, I am running the weathertech ones and like them. https://www.clearviewaccessories.com.au/shop/?wpce_search=1061128&post_type=product...

Hard to tell in the picture, but looks like the wire is in a separate loom that was added by a PO, my suggestion would be to trace the wire back and see where it goes.

Anyone found a good color match for the Blue/Gray interior color in PETG or ABS?

Great idea, I just have a hose running along the fender on my conversion, this would be much cleaner. I would buy one if you sold it individually.

Gotcha, yea regardless if it is the root of the no start issue, I would get that alarm system pulled out, especially if it is non-functional and the install is questionable.

Might be a little work, but should be pretty straight forward as to what to remove and repair if you work your way through the alarm harness. I would also check and probably just replace your fusible links as well if you haven't already done so, mine were pretty worn and brittle.

From what I understand is that if you have the dealer installed unit, they used a harness that just plugged series with the main connector under the dash. So you should be able to just remove it and plug the connector in without it. If your are unlucky like me and a previous owner had installed...

Nice job, added to my wish list. Are these just raw aluminum, or are they clear anodized?

Are you taking into account the currency exchange, pricing on their website is in AUD, should be around $500 USD shipped to the US for the first and second row vinyl set.

That 40's engine bay is super clean!

The FUYAO glass was all that was available in my area when I had mine done. I ordered an OEM Toyota gasket and had them use that for the install. I read through the manual on the install procedure and made sure they did it the right way when they installed it and I have not had any issues after...

Haltech has a plug and play harness options for the 80: LandCruiser 80-Series - Haltech - https://www.haltech.com/product-category/ecu-plug-n-play-kits/toyota/landcruiser-80-series/?srsltid=AfmBOoqJQWxMfEc6g077zDARhBX3Hh5LnvObUUZ0cQw9euZXh7VDqo9D

For the fronts I just purchased the AISIN ones, same as OEM Toyota. For the rears I went with the ACI brand ones on rockauto, and they work great so far. Front Right: AISIN RPAT036 Rock Auto: https://www.rockauto.com/en/moreinfo.php?pk=11347841&cc=1276680&pt=15596 Amazon...

😂 Gone in 60 Seconds style