Recent content by Jasonw22

Are you moving to silverdale? I'm in Bremerton, WA. Good to see another Mudder headed this way. If your looking for a good club to run with look up the Quadrapaws in Silverdale. We could use another Cruiser in the group.

Thanks gentlemen. I suspected that was the problem. I am going to machine a 12mm bolt to accomodate the original restrictor. For the time being I will use a plug. The odd thing is that when I first put the new bolt in it worked great. That was with a full tank of fuel. Is it possible the...

I only drilled out the top end of casting and used a bottom tap. I didn' run it all the way through the casting. Basically I replaced the original 11mm threads with 12mm. I didnt see any ports where I tapped for the new fitting.

1973 FJ55, F engine, stock carb (rebuilt 6 months ago) Problem: Seems to be fuel starved under heavy load ie. going up a hill etc. Idles great. Check List: New fuel filter, cleaned tank and lines, mech. pump is working fine, no blockage at all. Good spark, good Vac. 19.5 Hg., timing...

Thanks PabloCruise! Satanic mechanic: I will post some pics of the rocker and rear QP protection. I can also tell you that the rocker is 2x4 .188 wall rec. tube with 1 3/4 .120 wallround tube nerf bars and is supported with 1 1/2 .188 square tube in five places which are welded to the frame...

1973 FJ55 Stock F engine-rebuilt 1977 Disc brake front end Lock Right rear Bucket seats Lots of sheet metal removal/replacement Custom armor-gotta protect the piggie parts Soon to come: Astro Power steering conversion, SOA, larger rubber, front locker, internal/external roll cage and much...