doseman's latest activity

I am an authorized dealer for them. I really like them. We sell a lot of the HP M3's, the 770's, 771's and now the new AT 811.s as well as the MT 772. I like the Bias Treps, but they dig and throw stuff. Takes some HP to get them turning...

Take two? Getting gooseneck ready for trip out west. Going with Maxxis G load 14 ply trailer tires for piece of mind. Old tires have good tread but 8 years old.

I leave for SAS9 on the 1st of August. Might still have wet paint!😁 Hoping for a big push this weekend. Front springs and shocks all around.

I got the fenders welded out. I started to flap sand a little. Still a lot to go and I need to patch the pass fender. I do not like to weld sheet metal!

Rear arb locker installed and tested on rack. Will formally test in dirt when I get back home from working out of town. We made it a club tech day about 10 members showed up and most helped with cleaning and removing parts and pieces

FINALLY - GOT IT! Went over what felt like every inch of wiring, all connectors and finally found my problem. The swap harness has its own fusebox for and a key ECU circuit had a loose wire. How I did not spot this one of the first times I...

Starts, runs, drives. Brakes are soft and need a good bleed, transmission linkage is a little off, and there are 1000 other projects, but yea I was ready to give it all up there for a while. Next up is to pick up where i left off and do the...

Very sorry I Missed this guys. I was working on the 80 all day while dodging thunder storms and chugging water. Looks like you got a lot done and I'm betting a few laughs and beers were had as well.

Only a few....lol!

Went for a spin in the 40 and flexed it out. I have some trimming to do.

Thanks everyone who came out today. It was a good showing and we got a lot done, even though it might not look like it. Hope everyone learned something.

What a showing! Enjoyed the camaraderie and hard work folks put it. Special thanks to @Beach80, @jmurunner , and @doseman. Seems like every time I turned around they were jumping in and making something happen. Big thanks to @matzell for...

Action pictures from my red chair.

The few picture's I took. We got it installed and tested with great results. Now to finish the compressor install and then find some dirt to test all systems together

I will be there.

Bet that thing has seen some sites

Trader Joe's in cville. Wonder how many miles it's got?

Got Retro fired up under TBI and desmog. Huge thanks to @doseman and @matzell as “call a friend” options

I got lucky. I think? My twin stick shifter kit does not appear to work or it is missing some parts. I was able to make a small adjustment to the linkage and the stock 60 series shifter works great and clears.

Full size spare is mounted and has balancing beads in it. Plan is keep the skinny 33 on it and the fat 35 on the trailer back at camp. Lighter on the spare tire carrier and will get me back to camp or home.

New addition to Maple Ave. Already a fan of trips in the ‘60. Birdie - left and Millie (Irish twin from the same parents) - right.

I hope everyone got to spend a little time with their Land Cruiser today. I spent way to much time cleaning, prepping, and painting a spare wheel for my spare 35 for LL. I also found an old sticker I had made in orange😊

I have the rear heater from my 40 up for grabs. Good shape no leaks. 80 series roof rack delete kit. Make offers. If not I will look up what these sell for

Happy 4th yall!

Happy 4th friends!