Recent content by DirtDauberGarage

Does anyone know what "IA" on the scanguage is? Intake air temp? I'm going to see if I can switch that to Transmission Temp

Welcome! Nice Ride!! What size are those tires?

Moved the Scangauge screen from the ashtray to the steering column. Mounted it with some Velcro. I like this better.

I have the day off, so I spent a couple of hours focusing on the transfer case. Take a look at these before-and-after pictures... WOW!

I spent a couple of hours scrubbing the rear differential, axle, and back third of the frame. This is definitely going to be a multi-step process, so I plan to divide the undercarriage into thirds. Next, I’ll tackle the middle section, including the transfer case and transmission. I’m sure I’ll...

Next, I plan to thoroughly scrub the entire underside using Scotch-Brite pads, scrub brushes, and plenty of degreaser. I’ll likely need to repeat this process a couple of times to ensure the undercarriage and inner frame rails are spotless (including the trans, transfer case, engine, etc.). Once...

I began at the front of the frame and methodically worked my way back, clearing each opening by blowing debris toward the rear, where the inner channel ends just before the rear axle. I repeated this process eight to ten times until I was confident all the dirt and debris had been removed. I...

I spent about three hours cleaning the inside of the frame rails using a tiny wire brush, sandpaper, a screwdriver, and compressed air. Two things surprised me during the process. First, I couldn’t believe how much dirt, gravel, and mud had collected inside and along the bottom of the frame...

Toyotas everywhere!!

Had a good group today at the Ride Lounge in Peachtree Corners GA

I wouldnt worry about it. We should have good numbers!

REMINDER!! Ride Lounge - Toyota Car Show August 23rd - 9:00-12:00 YOTA Atlanta Meet Up Hope to see you there!

Awesome! I am glad you figured it out!!!

I misread the first post, but glad I posted to "bump" the post. I agree with @60wag - That sounds like a good place to start.

Sorry about that. If there are any in the Atlanta area you are interested it, let me know.