Recent content by claymation

My LC200 has the Icon Stage I which is basically a 2 inch lift and the rear end wiggles like a mofo when going over bumps on the highway. Problem is I can't tell if just an adjustable track bar will correct the issue or will it need the trackbar riser also?

The adjustable panhard will fix the axle alignment, but not the bounce. I had an adjustable panhard on my 80 series and when I added the Delta panhard riser everything improved and the vehicle handled better. cool, who makes one for the LC200?

had it re-aligned by a place that i trust and it seems to be a bit better. Here's a diff angle pic and as you can see not a big lift. Considering the adjustable panhard rod option at the moment..... good info, I think I'll try the adjustable track bar. Thanks!

All good points, and yes I'm very sensitive to vibrations, alignment etc. All that was installed on the LC was the Icon Stage 1 suspension system which is simply front coilovers and rear shocks/coils. Best description I can think of is when traveling maybe 30 mph plus and when going over what...

You think a poor alignment might be the cause? Funny cause the shop I paid to align the LC "lost" the spec sheet. You just might be on to something here...

all good points but i've had at least 10 lifted 3/4 ton trucks over the years and never noticed it. You think it's just WAAAAY more noticable on the LC?

Its got the Icon 2.5 setup. Installed the front coilovers as they came which is set to 2.5 inches

Most of those pics make the front look higher than it is. I'll try and find a pic sitting level. Checking the KDSS valves tomorrow.

Finally got her all done. Love the vehicle but something strange is happening when going down the highway and driving over bumps or "waves" in the road that make the vehicle rock forward and back. Seems like the vehicle is shifting right and left. Almost as if one right or left shock is...