Recent content by Christian

North european versions doesn’t have rear AC, but rear heater, just like the 40, 60 and 80 series did here, usually located under the pass. seat or centre console. I thought the “REAR” switch was for that? The biggest thing is my HVAC doesn’t blow down towards the feet.

My PX6 works fine, except two issues: I can’t turn the rear heater on, both the hard and soft switch activates, but the heater doesn’t. I thought really no biggie, I can just reach back. But the HVAC doesn’t activate the front foot heating setting, again, the soft button works, but it just...

Exactly what I needed! Thanks!

Sorry for the (very) late reply! I got the motors from Russia on Ebay. Connectors were there for the right side, both ends, and they do work. The manual parts? You mean just the latch? I did find this picture, it seems there’s a plate under the motor that I didn’t get.

From manual to motor, it even has the wiring already for the left side…

Hi, I’m trying to install a set of power vent window motors in my 2006, but the holes doesn’t line up? They are 1/4-1/4” too far apart and maybe 1/2” too far in? I thought they would bolt right up? any help would be great!

Hi Dougal, I’ve sent you a PM

Fader? So mine has the built in DSP, but if I mute the front speakers, the rear mutes too? In console I can adjust volume front to rear, but not in DSP? What gives?

Many will say “just rip it out, xxx springs and shocks are much better”. My opinion is that they are wrong. The AHC system isn’t that complicated, and my old truck had 520.000kms (325.000 miles) on it on salted roads with only a few and inexpensive problems. Mine actually did almost the same...

So I bought a set of vent window motors on Ebay encluding switches. Today I went behind the left switch cluster for another reason, but looked anyway. Looks like I have the right switch plug already, but not the left? what gives? Was any of there born with one window motor or one switch?

I have an ‘06 Cruiser, everything works except I can’t activate the rear heater? What harness did you take out again, and what problems did you experience?

I really like the way this thread goes...😉 I have previously installed a set of Audison Voce K6.5 with succes. I wonder if their 3” could fit the LX470 door card...?

I've considered adding the needed lenght to the port on the outside, should be possible! But having seen how much space is available in the other side, I might just go with a custom box there instead...

Hi! My issue is that the Techstream linked in the first post doesn’t have my Cruiser. It’s a 1HD-FTE. I tried changing region from America to Europe, but that required a key. I had the CD years ago, but lost it, and a new PC means that I needed the download. Techstream runs fine in the virtual...

Thanks for the excellent write-up Arnaoud! I have a 2006 too, and I’m about to order one. I have narrowed it down to the ZWNAV too. Could you tell me where you got it, price, delivery time etc? And what is your screen resolution? I see both 1024x768 and 1920x1080 advertised?