bhicks

Thanks for the orders folks. We sold a handful over the last couple days. Those will ship out tomorrow morning.

We finally got the first batch done and ready to ship. We have 10 ready to ship today and another 10 will be ready to ship on Monday. If they sell well then we will make another batch. If it takes a while then this will be the one and only batch...

I didn't get much interest here but I got at least some interest on other platforms/social media. It's enough interest that we will at least commit to one batch of these getting made. We will go ahead and make a batch of 20 plates. These will...

If we get a 1st Gen in the shop anytime soon then I will see if I can come up with a creative solution.

That layout is a bit more complicated. There isn't enough room down in that corner to add a 3 hole bezel. It would visually look very awkward as well. I think the easiest option would be to use a new location just to the left and run the wire up...

Can you snap a pic of the area around the rear 12v plug?

I guess I can somewhat answer my own question. After some research I was able to find pics of this plug equipped in an 08, 10, 11, our 14, and a 15. Not sure if later years came with this plug or not. Still digging. Looks like it was offered...

We recently picked up a 2014 Sequoia for the shop. Our old 80 Series Cruiser needed to retire as the shop truck and be a strictly trail rig. One of the things that bothered me was that the rear cargo area 12volt plug didn't stay in the hole. The...

Looks great. Thanks for the pics.

The 5.5" x 3.75" badge is the grille badge used on the 03-05 100 Series, The 2nd Gen Lexus GX, and the rear of the 16+ 200 Series rear hatch. Was also used in some years Tacoma and Tundra grilles but I don't remember the years off the top of my...

If you get a chance; post a pic of it installed. I only had the one console/customer to work with so my pics of the cup holder are very limited.

We don't typically sell our files but in this situation it may make the most sense. We will give it a couple months to see what type of demand we get.

Thanks for the orders guys. We made a small batch of 10 to start for each design. We have 3 left of the front cup holder and 5 of the rear cup holder. Another batch is in production now and that will probably last for a while. I don't anticipate...

They both suck when it comes to fees and take about the same amount. Use whichever you prefer.

As of right now we only have 2 seller platforms that we ship internationally through which is Etsy and Ebay. Here are those links in case folks are interested or want more info about them in the product descriptions. Ebay...

This is the rear design that replaces the OEM ashtray. We were not limited by space as much so we had the ability to go with a larger diameter for the large 36oz. and 40oz Yeti and Hydroflask bottles when the removable insert is removed. When...

We got our hands on a 96-01 Prado console recently from a customer and we were able to come up with some functional cup holders. So you can't say we didn't make you guys anything. After some real world testing and final updating; we have our...

Thank you. I didn't know it was a 90 Series. Learned something new today.

We got our hands on a 96-01 Prado console recently from a customer and we were able to come up with some functional cup holders. After some real world testing and final updating; we have our designs wrapped up and now in production. I wanted to...

For comparison here is the 4Runner insert for the similar space on the console. We currently have two versions for the 4Runner with each having a different focus on function. I have been told that some 4Runners have the pickup console and some...

Time for an update. We finally got the pickup cup holder insert designed. This is specific to the pickup and does not fit in the 4Runner console. I will post the 4Runner version in the next post for comparison. We just started to launch our...