southerntaco98

I swear you're worse than the 10 alarms I set in the morning....jk, it's incredibly motivating and I appreciate it! We've made some pretty serious progress as we finally got back to this thing a few weekends ago. I have mixed feelings about the...

I know I'm way late on this post. But I was told that the cove was closed down and is now private property. I did read on ON X Offroad that its open on Saturdays but you had to pay the guy or something which I have no issue doing. But i just...

yeah maybe after I remind him in another three years. note to self and to @yotadude520 for me to check in in 2028

What a Legend lol. 3 years later and you remembered this. Now he has got to finish this build :grinpimp:

I had a period of analysis paralysis over the 2nd 15 degree bend with the 25 degrees of rotation. On the first bend I rotated the tube down and did the bend. Perfect. I'm working from the center out. Not from one end to the other so I wasn't...

Just a quick update. I survived moving my daughter back from Wisconsin. Of course there's moving IN stuff going on that she'll need help with, but I found a window of opportunity to finish my main hoop today. I did end up doing the lower bends...

Life is REALLY getting in the way of this build. I had a tough time mocking up my halo hoop mainly because of gravity. The Rogue Fab Mag Rings that hold the tubes in place work great for vertical stuff but they are not strong enough to hold my...

If I can't get my big welder in to weld this I can use my little Miller flux core machine.......I think. No headliner in to burn up at least. Edit: Some rule books say NO flux core welding process allowed. TIG or MIG (solid wire with gas) only.

Looks like I don't HAVE to move my ECM. I might see if there's enough slack in the harness for a higher location though.

I finally got my two A-pillars bent up and fit up. Man what a challenge this cage is for me. I did manage to build a matching mirror image pair. I used spacers and bungee cords to hold them in position. Some magnets and whatever else I had laying...

I ended up using my tube jig to cut various angles in some scrap pieces of PVC tube. I used them on the very ends of the protractors until I got a perfect fit. I mark the tubes in relation to the protractors and the copes on the ends to ensure I...

Today I worked on this tube. (Front Crossover) Took me a while to get the copes accurately cut for a good weld joint.

Well its been a few months but I've been picking away at it. I got the dual cases and twin sticks done. Then started having fuel issues so decided to convert it over to propane. So now just got to order the P/S pump and build the cage and then...

https://forum.ih8mud.com/threads/the-build-of-knuckles-the-echidna-warrior.1285780/ Here is a link to my latest project. im almost done and ready to hit some trails even though this place is dead now im sure there are a few folks that still...