FJ40 | BJ40

Classifieds: Toyota 40-series Land Cruiser

Filter by prefix:

One owner 70 FJ40
**********SOLD********** I'm listing this for a elderly couple. They bought the cruiser new and it has around 70,000 miles on it. It has been in southeast AZ it's whole life and is rust free. It was mainly used as a hunting and camping vehicle. Ramsey PTO winch and spare tank have been added. A couple year old 2F replaced the F145 because os burn valves. The front bumper has a very heavy strap welded behind it. I know myself it a very common problem catching the bumper ends while hunting. Seem it happened on his first FJ40 so he beefed this one up. Rear step, bumperettes and reflectors were removed and a heavy piece of angle iron was bolted for protectin. The refectors are MIA but the rear step and bumperettes will be included and...
I'm selling my '74 Toyota Land Cruiser FJ40. Original engine, body is in good condition. No mods anywhere. Hard top and bikini top, full doors. No significant rust; diamond plate back quarter panels. Needs a new carb, but I think it would run fine otherwise. When the carb was working it ran fine last summer, but I haven't had the money for a new carb, and I've had the top off for the last several years, so it's been on my carport since last summer. Asking $7000. Here is a link to some pics. http://74fj40.shutterfly.com/pictures#n_5 Let me know if you're interested.
1974 fj40 land cruiser
got a clean 1974 fj40 land cruiser complete with hard top and doors, dont want to sell it but it is what it is, basically stock other than a 350 chevy adapted to the stock 4 speed. has u bolt skids dual shocks etc. has one small rust spot under the tailgate in the back other than that its very clean. fender wells have been cut out but i was going to install some flares( that will come with it) to cover it up. rig runs and mainly need the cluster and switches reinstalled as well as master cylinder installed (also have) sitting on jacks at the moment but will have rollers before sale.has full cage, i have all the parts to put it back together( switches, brake parts, all in boxes in the back) brown area under the driver door is where...
73 FJ40 for sale (Kansas City)
73 FJ40 for sale (Kansas City) Price reduced I hate to do it, but it is time to sell the 40. The family has outgrown the truck and I need to make room. I live in the Kansas City Area and am asking $9,000. I bought the truck in Colorado about 5 years ago . The previous owner had the engine rebuilt in Colorado and gave me the information from the shop in Golden. Since then I have done quite a few things; Carb rebuild, new alternator, fuel pump, master cylinder, clutch slave rebuilt, points cap and rotors replaced, valve job and tune up, and new muffler/exhaust. I have done a frame "up" restore, replacing the rear quarter panels and sill with new steel and sandblasting and repainting the rest of the vehicle. The hardtop has...
'76 FJ40 needs more than we can give it
Bottom line: $3000, 6cyl, hi-lo 4WD, manual trans. Engine in good shape. Body good, no rust. Needs brakework. Story: we bought it from the original owner 15 years ago, who put on about 120K miles on it. We just used it to get to hiking trailheads in the truckee area, putting about 100mi/yr on it since then. Stored in our garage year round. Passes smog with no effort (just renewed this month/May). When a rear brake adjuster seized this winter, our regular mechanic said "This is a project car now and I don't do that." We're not project car people, so our beloved toy needs a new home where it will be better understood. (It's available for a test drive only if you understand it does not have rear brakes right now.) Contact: Email Karey...
1973 Landcruiser FJ40 Drivetrain: 6.0L Vortec LQ4 from 2003 Silverado (professionally installed and dyno tuned) TH350 with Art Carr shifter, remote cooler/electric fan unit Dana 300(Novak trans adapter, Advance Adapter twin stick conversion, master rebuild kit professionally installed with 0 miles) Front Axle- Dana 60 Custom narrowed axle 35 spline alloy inner/outer shafts with super joints (and full set of spares) 5.38 gears ARB air locker Hydroassist steering Disk brakes 5x5.5 lug pattern Dual Wilwood front and rear master cylinders and brake pedals for cutting brakes Rear Axle- Ford 9” Custom narrowed axle Backboned and trussed Strange Nodular third member with pinion support Detroit locker 35 spline alloy shafts 5.38 gears...
1975 Toyota Landcruiser FJ40 $5,500 OBO 2F Engine, 169,625 miles has it all. Rust, dents, scratches, dings and leaks. Now on to the good stuff. Weber 44 IDF carborator, offenhauser intake manifold, header, accell coil, new alternator, new water pump 6 lap seat belts, 2 facing double jump seats, rear ambulance doors, hard top, bikini top, soft doors Rear heat, family roll bar, Rear gate with racks and spare tire carrier Safari Rack – 5 ft x 7 ft Selctro hubs, one spare tire, CB with mounting bracket and CB antenna, ready to drive, just add tires Extras One set rancho springs 44 IDF jets Power steering kit Spare distributor Disc Break kit with fine spline birfields Spare coarse spline birfields Spare...
FJ-40 Excellent Condition - Virginia
Excellent condition. Must see, Power steering, Power brakes. Too many new parts to list almost everything is new or restored. Virtually no rust. Body is in fantastic condition including original floors and any surface rust was coated with either por-15 or Rust-bullet. Has current Virginia state safety inspection. Also has hardtop painted to match in excellent condition. Has besttop soft top, soft doors, and bikini top. -New 4 wheel Disc brakes. The entire braking system has been replaced, including master cylinder, booster, all lines, calipers, etc. Aluminum radiator, new power steering pump. -Rebuilt Chevy 327 with new Edelbrock intake and 4 barrell carb. New wires, 7 quart Moroso oil pan. Very powerful. -new painless wiring...
Hey guys, I am looking to buy a 1976 or newer FJ40 on the east coast. I am in Kennesaw GA. I have about 5k to spend, not looking for a major project but am willing to put work into one. Need it to be running, or close to there. Shoot me a email at chandlergraham1(at)mac.com or give me a call at 404-sixsixone-9100. Thanks, Chandler
1977 fj40 socal $4000
Selling a 1977 FJ40 currently registered in Florida. Located in San Clemente, Ca and will not pass smog right now. Also has crack in windshield. $4000. -2F Inline six. Has been replaced at some point by previous owner, but unknown mileage. Drives great around town and on freeway. -HEI Distributor. -4 speed manual transmission. Good clutch. -Front and Rear ARB air lockers with compressor. Works great. -2-3" spring lift, 33" Goodyear MTRs -New rocker and quarter panels installed. -Tuffy center console with CD player. Great land cruiser for driving around town, on the sand dunes, or in the rocks. Moving back to east coast so need to get rid of it.
Feeler... 1975 FJ40 Resto
I am contemplating putting my '75 FJ40 out here for sale, and wanted to test the market to see what kind of response I got. It is a 1975, I am second owner, 95k original miles, rustic green (re-painted last year with OEM single stage) no rust, interior rhino lined. The tub was replaced with a newer non rusty one and the quarter panels were replaced on that tub with CCOT thicker gauge steel ones. It has ambulance doors with hard top (hard top needs some interior attention like drip channel etc...) It has new fenders from CCOT, skyjacker 2 1/2 lift with anti inversion shackles, OEM white wagon wheels, upgraded tube style tire carrier, SOR winch bumper, trollhole carb etc... Engine runs like a sewing machine, transmission shifts smooth...
1977 FJ40 V8  (northeast)
I have decided to sell the 77 V840. Runs excellent, wheels great. Located in New Hampshire >Professionally rebuilt "355" Chevy V8, est 330 HP, less than 2000 miles on rebuild, PO claimed $3500 for rebuild...... >New Edelbrock intake and carb, set up for offroad, works great >chrome headers, dual Borla stainless exhaust >new Centerforce clutch >SM465 Transmission, 6.5:1 first gear >3 speed TLC transfer >SOA on 2 1/2 inch springs with highsteer >Shackle reversal in the front >36 inch TSL's on 15x10 chrome steel, lotsa tread >Saginaw Power Steering >Rebuilt axles,4.11:1 diffs, front disc brakes, welded rear end, lockright in front >Longfield 30 splines >New Warn Hubs >Full cage >Rear tub has been reskinned with 10 guage, no rot, no...
1975 FJ40
1975 FJ40 back up for grabs I have to sell my Landcruiser:crybaby: Had a son this spring and cuts at work. Somethings gotta go so here it is. Its a 75 with hard top and doors. Mostly clean as far as rust. very little surface rust on original paint. But the rear corners have their trademark rust. Mods include 4 inch skyjacker lift, pro comp shocks, 35 inch baja claws on black rims,(can switch out for newer 33" baja claws and reduce price a little) weber carb, Kand N, headers, leather seats up front, tumbling jeep seat, Rhino lined tub DIY. 2F is amazing, starts and runs great even in winter. used it daily to take son to day care this month as I also sold my duramax It is almost all original except for upgrades listed and...
1969 FJ40 all original I have a classic 40, all original, less a distributor up grade, The truck is unmolested, un-cut. The body is mostly rust free, the sills a rusted through, below where then meet the tub, the driver and pass floor just has surface rust, frame and underside was undercoated, when peeled away, looks clean, just surface rust on frame..Truck is a daily driver, drives straight and true, no loose steering, brakes work great, everything in the truck works, less the interior light. In addition the truck has a new(not rebuilt) carb, clutch and slave cylinder, Everything is in great working condition, including the winch. Text Drake 801-376-0330 I can e-mail more pics
I got this truck just a few months ago...I knew the owner for many years ...he had past away and his son sold off all of his belongings...so I bought it... To say the least I have very little knowledge about these trucks... $9000 OBO.......The FJ has a 1972 1F engine....I'm sure of that as I recall the thing going in around 1996. It has a 3 speed on the floor. The carb needs to be rebuilt . The rebuild kit is around $25 or u can just replace it if u like...This model has a unique tail gate that is a fold up style with 2 swinging barn doors that was only around for a few yrs...I believe just on the 63/64 FJ's the body is solid....I've learned from another FJ forum that the 1963/64 used a treated metal and is not prone to...
I'm looking to buy a solid FJ40 in or near Montana. I've been watching the Classifieds forum and Craigslist but haven't found the right one yet. Looking for one with little or no rust, mechanically sound, and preferably lifted. I'm not looking to spend more than $6000. I'm located in Billings, MT, and willing to drive to neighboring states or work out shipping. Shoot me a pm or email with any info you might have. Thanks R.

Thread Filter

Google Preferred
Back
Top Bottom