Safe ssumption that rear springs on a 2004 are the same as 2000? (1 Viewer)

[superdosser]

I'm hoping to have new custom rear springs made and the only specs the shop can get are for a 2004... Thanks for any help.

 

[e9999]

ask CDan...

 

[Landpimp]

I wouldnt count on it, if like the 80 series which had a different part # for almost every year......

I would guess 2000 and 2004 would be close......but might have different spring rates....

why not use the specs from a set of OME springs?

 

[Greg B]

Or, why not just use OME springs instead of custom?

 

[SINCITY100]

I'm hoping to have new custom rear springs made and the only specs the shop can get are for a 2004... Thanks for any help.

Just checked...


The actual part #s for the rear springs MAY be the same from 98-2006 (48231-6A690 LH and 48231-6A680 RH) The interesting thing is...there is a height CHOICE on the springs for 98-2002 models (492 or 504 mm LH and 486 or 498 mm RH)...BUT the taller of the two springs exclusively fit all 2003-2006 models (`06 without AHC, which is new for 2006)

Hope this helps ?....

 

[cruiseroutfit]

OME Coil Specs:
http://www.cruiseroutfitters.com/tech_OME_coils.html

 

[superdosser]

Thanks for the info!!! most helpful.

Thanks for the info!!! most helpful.

 

[SamoL]

Does that mean, that stock coils are longer than OME 866? (In fact: longer than almost any OME spring?)
Of course the spring rate is different. How much lift is to be expected from individual OME coils?

Regards

Samo