Wheel swaps

[jeffxlh]

What other Toyota wheels will work on an FJC. I'm looking for another set to put some more agressive rubber on. Will the tundra, taco or Sequoia's work?

Thanks,
Jeff

 

[Blues Dawg]

What other Toyota wheels will work on an FJC. I'm looking for another set to put some more agressive rubber on. Will the tundra, taco or Sequoia's work?

Thanks,
Jeff

Wheelers offroad (www.wheelersoffroad.com/ )has some 16X8 steelies for $65 that'll do the trick

Carl

 

[jeffxlh]

My buddy has a set of 16" wheels off his Sequoia I can have for $100.00. Will they fit???

 

[SunFuCru]

I am using the 16" steel rims off of my wife's Sequoia. They fit fine with 33" BFG A/T KOs, no rubbing. They look right on the truck, and I dont mind if I knock them about on rocks or curbs.

 

[jeffxlh]

Thanks, this is what i wanted to hear. Any other success stories?

 

[FirstToy]

-4Runner, Tacoma, Sequoia, Tundra, GX470 wheels will fit.
-FZJ80 alloys will fit (but *might* stick out too far-unknown)
-98-07 Land Cruiser/LX470 will not fit- 5 lug pattern
-of course, big aftermarket selection...

 

[mbisson]

-4Runner, Tacoma, Sequoia, Tundra, GX470 wheels will fit.
-FZJ80 alloys will fit (but *might* stick out too far-unknown)
-98-07 Land Cruiser/LX470 will not fit- 5 lug pattern
-of course, big aftermarket selection...

Not all Tundra wheels fit. I have already tried the wheels off my 2001 Tundra and they don't clear the calipers. It is always best to test fit before you buy.

 

[DuManchu]

I saw a yellow FJC here in KC, lifted with FZJ80 wheels and it looked badass. If I had an FJC I would get 80-series rims. Makes the truck look tougher.

Photoshops...

 

[jeffxlh]

I picked up the Sequoia wheels, I'll let the tires make it look tough. I'm realy only worried about function. They will be occasional use!

 

[Tools R Us]

I saw a yellow FJC here in KC, lifted with FZJ80 wheels and it looked badass. If I had an FJC I would get 80-series rims. Makes the truck look tougher.

Photoshops...
View attachment 121582

FZJ80 wheels don't fit, the calipers rub the spokes on the front wheel. A 1/4-3/8" spacer looks like it would solve the problem, rears fit fine. Offset, UCA clearance, etc looks good.

 

[Blues Dawg]

You didn't show the machining on the inner rim that resulted from driving forward 1 or 2 tire revolutions Guess that what happens when you try to put real Landcruiser stuff on an FJ Cruiser! But at least now we know the 295/75/16's fit with room to spare w/ the ome lift

 

[Tools R Us]

You didn't show the machining on the inner rim that resulted from driving forward 1 or 2 tire revolutions Guess that what happens when you try to put real Landcruiser stuff on an FJ Cruiser! But at least now we know the 295/75/16's fit with room to spare w/ the ome lift

:whoops: didn't shoot a pic of the scratches.