The Club's transmission jack (1 Viewer)

[jebber]

Who currently has our jack?

 

[JasonH]

I do.

 

[jebber]

Cool. I'm gonna need it at some point after round up. No rush.

 

[Fireman]

What did you break?

 

[jebber]

What did you break?

The bank.


Ordered an Orion and picked up an h41 tranny. You are more than welcome to come down and help me install them.

 

[Fireman]

Crickets.....jk. that might be fun. Or you could bring them up here and we'll borrow a lift.

 

[landcrusher909]

The bank.


Ordered an Orion and picked up an h41 tranny. You are more than welcome to come down and help me install them.

Did you sell your old trans and t case ? I forgot what you were running

 

[jebber]

Not yet. I have an sm420 with stock three speed t-case (twin sticks).

 

[1911]

Ordered an Orion and picked up an h41 tranny.

You are going to love that combo; I know I love mine. I recommend going with twin sticks. I tried mine with the stock linkage first, and it bent the stock low-range lever on top of the case.

You are more than welcome to come down and help me install them.

I installed mine by myself, with a cheapo Northern Tool transmission jack. I think I did use some straps hung from the roll cage to help balance it too but don't remember for sure. The tranny will stab into the clutch a lot easier if you have a helper to hold the clutch in while you stab it though.

 

[JCBELWOOD]

I know a guy with a lift…..he aint much help, unless you need a bunch of heckling, or something cut or welded & thats just because he just got some new toys for that.

 

[Fireman]

Maybe we can do it at the wedding reception. Talk about a heckling section.

 

[jebber]

I know a guy with a lift…..he aint much help, unless you need a bunch of heckling, or something cut or welded & thats just because he just got some new toys for that.

A definite possibility. I could use some fab work too.

Maybe we can do it at the wedding reception. Talk about a heckling section.

I'm not thick skinned enough to endure that.

 

[JCBELWOOD]

Pretty sure they installed an Orion at or before Clutchees 1rst wedding'……….I assure you, you aint gonna want me working on your rig at our reception

 

[Clutchee]

Pretty sure they installed an Orion at or before Clutchees 1rst wedding'……….I assure you, you aint gonna want me working on your rig at our reception

Yes and yes.....

Heck if the 41+ Orion are mated should just need stabbed in but know it never works that way!