Rear Ladders For The 80 Series LC

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Status
Not open for further replies.
Here are the pics of the 2nd ladder.

I'm actually thinking about swapping the bottom brackets with the first ladder since the ones from the above ladder might match the powdercoating texture better.


.


.


.
09 02 11 028b.webp
09 02 11 031b.webp
09 02 11 032b.webp
 
Mot,
Got the notice from the post office yesterday the ladder was in and picked it up today! Shipping was super fast and the ladder looks great. The brackets look fine, you did a great job of painting them. Thanks a million for this cool mod. I'll post a picture when I get it mounted.:bounce::bounce2::clap:
 
Hey Kenny,

THRILLED to hear that you've got it and that you seem pleased with it!

Please let me know if you have any issues mounting it as I would take care of it/you!

THANKS AGAIN!!

Mot :)
 
Update...

OK, the ladder #5 is officially too tweaked to be mounted as is.

If you feel that you can bend it back to make it work, it's yours for $25, plus ride.

Also, the OEM ladders (two of them) have been sold, as well as one of the chrome (#3) or the powdercoated ones (#4) has been tenatively sold to another Mudder (Will let you know which one stays).

Thanks again!

Mot
 
New Arrival...

I've never dealt with this manufacturer before, except when someone from Texas asked me to pick one up for him, new, YEARS ago! :D

It's made by Ganador and is used, but in excellent condition.

Mot of the ladders that I've offered only let you put one foot on the step at a time (relatively narrow), but this one will let you put both feet unless you're a Big Foot. :flipoff2:

As with others in their product line this ladder is very well constructed and is a beaut!!

As you can see in one of the pics although it is sturdy, it does not weigh a ton, so it does not sag your hatch down when you open it, unless your struts are worn out! :hillbilly:

.


.


.
LC80 Ladders, NGK Stuff, and OEM Fogs 001.webp
LC80 Ladders, NGK Stuff, and OEM Fogs 006.webp
LC80 Ladders, NGK Stuff, and OEM Fogs 005.webp
 
Here are some more pics, of the mounting part.

It has some weird-shaped screws (I imagine for theft deterrent), but I did not receive the screw driver for it with the ladder. But you can easily replace them with regular screws (Come to think of it, I can probably pick up the correct size easier than you guys, so I'll pick some new ones up and toss them in there).

Anyway, it's rare, and is beefy, and cost me more to acquire, so I'm going to ask $185, plus shipping. But feel free to give me your best shot though! As a side note, when this was available from the manufacture (Has been discontinued for quite some time now, it retailed for around $400).

Because of its size shipping will have to come via express air for you guys in the US. For Canada it could also be slow-boated (They allow bigger cargo for slowboat than the USPS).

One advantage of express air is that it usually does not warrant as much/heavy of packaging job. :hillbilly:

ANYWAY, I'm offering to actually ship it via express air (to the US/Canada) for less than what it'll cost me, at $75US. If you're in Canada and wants it slowboated (2-3 months) I can ship it for $50US.


.


.


.
LC80 Ladders, NGK Stuff, and OEM Fogs 009.webp
LC80 Ladders, NGK Stuff, and OEM Fogs 007.webp
LC80 Ladders, NGK Stuff, and OEM Fogs 011.webp
 
Last edited:
And this is what it looks like from the inside... (I didn't have the peace/piece :hillbilly: of mind to take it from the USDS).

You can tell from the picture that it does not obstruct your view at all. And as with all of the ladders that I've sold/offered this will not require any drilling to the sheet metal, either. So no worry about rust penetrating, etc...


.


.


.

Anyway, thanks for looking, and let me know if you could use something like this for your upcoming camping season!

BTW, express air can get to your door in about a week, if not a bit sooner, and it's fully insured and can be tracked via online.

LET ME KNOW!!! :crybaby:
LC80 Ladders, NGK Stuff, and OEM Fogs 016.webp
LC80 Ladders, NGK Stuff, and OEM Fogs 018.webp
LC80 Ladders, NGK Stuff, and OEM Fogs 001.webp
 
Not for the 80, but...

I've got a ladder for the 60/62 and another one for the 100/LX470 on e-bay now!

Please let me know if you have any questions for them.

I am planning on putting one for the 80 shortly as well, so please stay tuned!

Thanks for looking!!!

Mot


.


.


.
OEM fogs and JAOS ladder 044b.webp
flex1.webp
OEM fogs and JAOS ladder 065.webp
 
Can't wait for the ladder thanks again Mot and my wife thinks it will be cool now saw an 80 driving around with one the other day.
 
Thanks!

I'm hoping to get a beefier bubble-wrap tonight and hopefully send it out tomorrow or sometime over this weekend!

THANKS AGAIN!!

Mot
 
Status
Not open for further replies.

Users who are viewing this thread

Back
Top Bottom