Passenger seat belt alarm

[Oldsy_FJC]

I am hoping that someone on here would be able to answer this question . How can you disconnect the passenger seat belt alarm, I know that this is probably already some were on here but how do you





Never mind I found it

 

[aaronsca]

It bugs me too. How can I disable it?

 

[Runner Ryan]

Open your owner's manual. It tells you how to do it in there.

 

[aaronsca]

For those who can't find it, it's pp 106 in my owner's manual:

The buzzer can be set not to sound by following the procedure below.

1. Sit on the front passenger seat.
2. Turn the ignition key to the “OFF” position with the odometer reading shown. (For details, see “Odometer and two trip meters” on page 100 in this Section.)
3. Turn the ignition key to the “ON” position.
4. Within 6 seconds, push the trip meter reset knob and hold it for more than 10 seconds.
5. Insert the tab of front passenger seat belt into the buckle.
6. The odometer shows either “b−on” or “b−off”. The reading changes by pushing the trip meter reset knob and the setting of the front passenger seat belt reminder buzzer can be changed. The odometer display returns to normal if the meter reset knob has not been operated for more than 10 seconds or the ignition key is turned to the “OFF” position.

 

[Bigun]

if you follow the same procedure from the drivers seat it shuts off the alarm for the driver and passenger..