parting out fj80 and fj60 axel

[rcmccars]

parting out an fj80 also fj60 axles

edit:: ok i sold what was left of the body frame and some other stuff i do still have some parts but i am going to start a new thread in the parts section thank you edit::


i am parting out a 91 fj80. front axel and doors are gone. the rear axles and housing are good but the 3rd is not. i have the 3fe, trans, and t-case has 226,xxx mi on it but runs good MAF sensor is gone. some interior stuff is good po took alot of it apart. i dont have any interior plastic. i dont know how much i want for parts just want them gone and need money to finish my 60.

i also have the front and rear axel out of an 86 fj60 front has new roters, pads, and wheel bearings. the only thing missing is the hubs. asking $400 but make an offer. the rear is complete asking $250.

edit front axle sold


i am kinda new hear so bear with me. you can pm or e-mail me with questions. i will try to be as acomidating as possible as far as pics and meeting people who live far away.

 

[rcmccars]

update with some pics

well it stoped raining so i could take some pics



this is what is left on the truck if you see any thing you want let me know. The master cylinder is gone. all the switches and relays are there but i dont have any interior plastic.

i have all 4 head reasts in good condition and they are gray Fabric $20 ea pluss shipping
all 7 seatbelts $30 ea plus shipping
gauge cluster $100 plus shipping

i have all the mechanical parts
motor w\ all acc $500
trans $450
t-case $400
or take it all $1000
air box w\ ok filter $50
windshield wiper motor $20

all prices are not set in stone and if im not being reasonable please let me know. e-mail is the best way for me to send pics if you want them so let me know what you need.

 

[rcmccars]

bump with pics

91 3fe trans and t-case i did clean it up a bit just because i dont like getting my hands too dirty if i dont have to.

(sold)86 axle if you take the axle it will come with everything you see leafs, sway bar brakes ect... if you dont want part of it let me know. the leafs are stock with longer shackles they have 170k mi on them and are getting flat but i ran 33 12.50 15s with some backspacing and never rubbed in the front. the calipers pads rotors and wheel bearings where all replaced about 1k mi ago and if you want i will toss in the stock replacement monroe shocks that have about 1500 mi on them.(sold)

 

[rcmccars]

bump all parts still avalible.

 

[tequila4x4]

first in line for 86 front axle. pm sent

oscar

 

[cruisedeisel]

still have upper and lower tail gates

 

[rcmccars]

I'm not parting out the 60 I put 80 axles under it and I just have the rear still. But I have no use for the doner 80 so I'm parting it out the doors and hatch where sold by the po. I still have the hood and fenders and what's in the pics and also the rear axle out of the 80 but the diff is no good.

 

[rymann fzj80]

Hi interested in the shifter handle if you still have it.....pm please and I'll get back to


thanks

Rob

 

[Michael Hanson]

Do you still have the exhaust down pipes? Dont need the cats. Mike

 

[rcmccars]

Did you need the manifold or between the manifold and the cat

 

[Michael Hanson]

Between the manifold and cat,if you cut them with a saw zaw I can reweld them. Thanks, Mike

 

[rcmccars]

bump

Still looking for someone who wants a good 3fe swap. Still have the rear axle out of the 80 the gears got chewed up so if your looking for one and planning on doing a re gear make me an offer also still have the rear 60 axle in good shape let me know what you need I'm moving soon and don't want to scrap good parts

 

[caldentey]

steering gearbox

Looking for steering gearbox for my 91 fj80. Interested if it's not leaking. Shipping to 97701. Thanks

 

[TegoXR]

still have the rear springs?

 

[rcmccars]

Pm's sent

 

[rcmccars]

Bump and happy Easter

 

[70fj40th]

if you decide to part out the engine, i could use the thermostat housing for a 2fe project.

 

[Landcruiser97]

Do you have the Radio Harness with Plug
that fits in back of the Radio

Thanks

 

[rcmccars]

I do not it was cut out for an aftermarket stereo Is what it looks like

 

[JamesR]

Still looking for someone who wants a good 3fe swap. Still have the rear axle out of the 80 the gears got chewed up so if your looking for one and planning on doing a re gear make me an offer also still have the rear 60 axle in good shape let me know what you need I'm moving soon and don't want to scrap good parts

I'm interested in the rear 60 axle. Where are you located? I'm in Ga, 30677.

73, James - KF4AQO Sent from my iPad using IH8MUD