'nother trip to "The Cliffs"
- Thread starter Mr.Bryan
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I would like to go but I think the terrain would be too tough for my non-diff 62. I still have to change auto trans fluid and repack birfields to be sure that I don't break anything. At least there should be less mud.Tell me if you ride at your friends place in ottawa, I think the terrain would be easier.
- Thread starter
- #3
archie, unfortunatly ottawa is gone. it was sold and the kid is a real weiner so we really dont hang around him any more. Anywho, as far as the terrain goes, its your call, you've seen it. if you care to ride along again your more then welcome to.
-Bryan
-Bryan
thanks for the offer! I 'll have to see because I might have to baby sit. IF you need a copy of the photo's and is difficult for you to down load, PM me your address. I can't seem to find your ph. no. since I moved last year and spent the winter in the Philippines. Tons of cruisers there. I'm glad I didn't see too many heeps.
I'm in for the trip on the 17th. I will also have the shop open on the 10th to rebuild Adrian's front axle. Anybody is welcome to stop by and use the facilities or just hang out and check out cruisers under repair.
todd, where is your shop, or are you talking about the shop up at the school?
i would like to stop by and get some help/guidance on a few things.
i would like to stop by and get some help/guidance on a few things.
The shop at the school 440 w. Aurora is the street address, but the shop is on the back side of the school (of course) across from the tennis courts on Hillside.
that is what i figured. i live literally 2 blocks away on south main. i just drove by there earlier today on the way to walmart and saw your rig parked outside the shop.
i'll stop by after you open up later this month
i'll stop by after you open up later this month
i mean i'll stop by on the 10th, didn't read your message right 
it was nice to meet ali, archie, bryan and todd yesterday at the shop.
hope to have more time next time around so i can hang out longer and learn some things.
hope to have more time next time around so i can hang out longer and learn some things.
I'm up for a trip earlier in the week if that works. Saturday does work best for me though.
- Thread starter
- #12
http://www.weather.com/weather/local/61341?lswe=61341&lwsa=WeatherLocalUndeclared
I'ma keep an eye on this. Hopefully sat. works out. Sunday a possibility?
Glad we're finally out of your shop? heh... damn toyotas
I'ma keep an eye on this. Hopefully sat. works out. Sunday a possibility?
Glad we're finally out of your shop? heh... damn toyotas
What time did you guy's finish up and what trick did you use to get those torsion bars off the 4runner?
- Thread starter
- #14
archie said:
well to get them out we just pulled off the mounts and basically slid them out the front.
As far as when we finished up..... tuesday. Yes, Tuesday. We spent like 5 hours trying to get the new ones to bolt down. That didnt work. Then sunday we figgured it out, but too late. we messed up the bolts and one of the nuts self destructed and so we had nothing to bolt them down with. Monday we ordered new nuts + bolts and we had to wait until tuesday to get them. Tuesday we go to the toyota dealer to pick them up and they only ordered the bolts not the nuts. So Todd and his infinite creativity instructed us to use lug nuts on the bolts, and it worked like a charm. So we got the stuff together and got out of there. This is offically labled the project from hell. But yea... so anywho.
I guess we're meeting out at the cliffs at 10ish. for anyone who cares to ride along or join last minuite.
-Bryan
Where's the pics? 
